Announcement

Collapse
No announcement yet.

Your Current FS Flight

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Originally posted by RingwaySam
    I programmed the FMC before but kinda un-programmed it when in-flight
    damn, are you using the LDS? cuz if you are I can write a quick tutorial here.


    Edit: Its 11:56am and I've gota get to my computer tech class, I'll be back around 3pm my time

    Comment


    • #62
      Originally posted by Chris@YYZ
      damn, are you using the LDS? cuz if you are I can write a quick tutorial here.
      Yeah im using the LDS.

      Comment


      • #63
        Originally posted by RingwaySam
        Yeah im using the LDS.
        alright, heres a realy quick tutorial:

        1) Open FMC
        2)Go To The Index
        3)Hit POS
        4)type in your airport of origian
        5)hit route
        6)program in your arrical and departure airports
        7)hit "Next Page"
        program in your first waypoint followed by all successive waypoints/airways and your arrival airport
        9)hit whatever is in the bottom right of the FMC screen (I forget what its called)
        10) The EXEC button should turn white, hit it.
        11) Your Route is now programmed, DO NOT TOUCH THE FMC AFTER THIS UNLESS YOU KNOW WHAT YOU ARE DOING
        12) To fly the route hit LNAV

        I hope this helps, if you have any more questions, post em here and I'll take a look when I get back from school.

        Chris

        Comment


        • #64
          Originally posted by Chris@YYZ
          alright, heres a realy quick tutorial:

          1) Open FMC
          2)Go To The Index
          3)Hit POS
          4)type in your airport of origian
          5)hit route
          6)program in your arrical and departure airports
          7)hit "Next Page"
          program in your first waypoint followed by all successive waypoints/airways and your arrival airport
          9)hit whatever is in the bottom right of the FMC screen (I forget what its called)
          10) The EXEC button should turn white, hit it.
          11) Your Route is now programmed, DO NOT TOUCH THE FMC AFTER THIS UNLESS YOU KNOW WHAT YOU ARE DOING
          12) To fly the route hit LNAV

          I hope this helps, if you have any more questions, post em here and I'll take a look when I get back from school.

          Chris
          Done, Thanks

          Muvr-tncm

          Lds 767-300

          Comment


          • #65
            Originally posted by RingwaySam
            Done, Thanks

            Muvr-tncm

            Lds 767-300
            no prob, good luck with the flight!

            Comment


            • #66
              Originally posted by Chris@YYZ
              no prob, good luck with the flight!
              I've just landed at 20:05pm (Not FS time) but I didn't know what stars to put in so I just whent direct which was abit of a pain in the ass...

              Comment


              • #67
                Haha were u flying with Sam H. ???

                Comment


                • #68
                  Originally posted by pkonowrocki
                  Haha were u flying with Sam H. ???
                  I was using FF anyway but he joined when I was 200nm out of TNCM before getting banned for being an ass

                  Comment


                  • #69
                    Originally posted by RingwaySam
                    I was using FF anyway but he joined when I was 200nm out of TNCM before getting banned for being an ass
                    LMAO!

                    btw, as far as I know there is no STAR for TNCM, I'll the flightplans I've found for TNCM usually end with a waypoint followed by Radar Vectors for either the Visual Approach, or the DME Approach.

                    Comment


                    • #70
                      Originally posted by Chris@YYZ
                      LMAO!

                      btw, as far as I know there is no STAR for TNCM, I'll the flightplans I've found for TNCM usually end with a waypoint followed by Radar Vectors for either the Visual Approach, or the DME Approach.
                      Can you add intersections to the FMC?

                      Comment


                      • #71
                        Originally posted by RingwaySam
                        Can you add intersections to the FMC?
                        after you've programmed/executed your route? yes, but I dont remember how off hand.

                        Comment


                        • #72
                          I'd recommend going to www.ldsflyingclub.com and reading some of the tutorials. The 767-300 FMC is very powerful, and the 'tutorial' above is only letting you take advantage of about 15% of its power. Setting up the FMC to make use of both LNAV, VNAV, as well as fuel predictions, SID/STAR/Airway databases, etc. will give you a whole new level of realism in FS.
                          Trump is an idiot!
                          Vote Democrats!!

                          Comment


                          • #73
                            Originally posted by RingwaySam
                            I was using FF anyway but he joined when I was 200nm out of TNCM before getting banned for being an ass
                            He didn't like me doing barrel rolls over his head

                            Comment


                            • #74
                              Originally posted by Chris Kilroy
                              I'd recommend going to www.ldsflyingclub.com and reading some of the tutorials. The 767-300 FMC is very powerful, and the 'tutorial' above is only letting you take advantage of about 15% of its power. Setting up the FMC to make use of both LNAV, VNAV, as well as fuel predictions, SID/STAR/Airway databases, etc. will give you a whole new level of realism in FS.
                              Thanks for that Chris, I'll give it ago.

                              Originally posted by Sam at MAN
                              He didn't like me doing barrel rolls over his head
                              Sam, you really are an arse and if you won't listen to me when I say I have crashes on then don't think you will be visiting FF again for a while

                              Comment


                              • #75
                                Originally posted by RingwaySam
                                Thanks for that Chris, I'll give it ago.



                                Sam, you really are an arse and if you won't listen to me when I say I have crashes on then don't think you will be visiting FF again for a while
                                You never said you had crashes on

                                Comment

                                Working...
                                X