Announcement

Collapse
No announcement yet.

Panteley Shmelev - Pre-screening request

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Panteley Shmelev - Pre-screening request

    i would like some suggestions on these edits ( I'm planning to upload them to JP) :
    Click image for larger version  Name:	IMG_0011-Edit.jpg Views:	0 Size:	530.6 KB ID:	1080775 thank you for your comments!

  • #2
    https://www.jetphotos.com/viewqueued_b.php?id=7883478 jut recently I got this rejection. it says the aircraft is too soft but in my point of view, it is very decently sharpened. Any comments?

    Comment


    • #3
      In my point of view(I'm neither screener, nor an expert) the photo is indeed soft and the front part is almost out of focus.

      Comment


      • #4
        ok thank you!

        Comment


        • #5
          Click image for larger version

Name:	1.JPG
Views:	123
Size:	197.2 KB
ID:	1080779

          Halos are very visible besides, the nose of the plane looks a bit out of focus. Of course these are my personal comments.

          Comment


          • #6
            If you are using photo software which supports a raster (superimposing a grid over the photo) then youŽll see that your photo could do with a little clockwise turning. My guess is that youŽre using a wide angle lens, I find it also difficult to decide which part of the photo is straight when I use one. Just my thoughts as a non-screener.

            Comment


            • #7
              Originally posted by Panteley Shmelev View Post
              i would like some suggestions on these edits ( I'm planning to upload them to JP) :
              Click image for larger version Name:	IMG_0011-Edit.jpg Views:	0 Size:	530.6 KB ID:	1080775 thank you for your comments!
              This would be rejected for horizon and soft.

              When you get a chance please read here, especially #4:

              https://forums.jetphotos.com/forum/a...ning-from-crew

              I've combined your two threads, but in the future please keep all requests to this one thread.

              Comment

              Working...
              X