If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
No one told you your image would be rejected, you were simply given a link to decide this for yourself (as you failed to provide examples of the images). As it says in the link that was provided, same sequence is similar. From that, we can assume different sequence is not, so one taking off and one landing generally should be ok, as long as the images are not identical. Generally, you can get a max. 4 images of any aircraft accepted: one from each side, and one each in the air/on the ground. The images from other photographers you refer to follow that guideline correctly.
Ah ok, I apologise for my assumption and thank you for making it more clear I will provide the 2 images I was talking about below.
The image of the aircraft departing is already in the database however the one landing is what I wanted to upload, Hopefully it will be ok
Thanks for all of the help
Ah ok, I apologise for my assumption and thank you for making it more clear I will provide the 2 images I was talking about below.
The image of the aircraft departing is already in the database however the one landing is what I wanted to upload, Hopefully it will be ok
Thanks for all of the help
Borderline case. Angle is not exactly the same, but they are pretty close (and both in the air), so personally I would consider them similar. Is there some reason you need to have both uploaded?
Borderline case. Angle is not exactly the same, but they are pretty close (and both in the air), so personally I would consider them similar. Is there some reason you need to have both uploaded?
No there is no reason other than I prefer the image of the landing aircraft however the other image is my first photo on this account and has the first reg badge so I guess I won't bother uploading the other.
Hi, I am just wondering if this photo would be rejected as it looks like the engine and in front of It is motion blurred when it, in fact, is not. The front is not very sharp so I have added sharpening but I'm worried it would be rejected for grain or motion blur.
Hi, I am just wondering if this photo would be rejected as it looks like the engine and in front of It is motion blurred when it, in fact, is not. The front is not very sharp so I have added sharpening but I'm worried it would be rejected for grain or motion blur.
Whole aircraft is soft/blurry, so yes it would be rejected.
Hello everyone,
I have recently received a rejection on the following photo and was wondering if it was saveable, please let me know also if is too much or too little contrast as it seems like it's not too bad but I may be wrong. https://www.jetphotos.com/viewqueued_b.php?id=8209939
One more question, Earlier today I took a photo of the RAF red arrows, The registration is not visible and its a photo of them flying in formation, What should I put the reg/aircraft down as. Should I just select a random reg of one of the aircraft and use that or should I do something else?
Hello everyone,
I have recently received a rejection on the following photo and was wondering if it was saveable, please let me know also if is too much or too little contrast as it seems like it's not too bad but I may be wrong. https://www.jetphotos.com/viewqueued_b.php?id=8209939
Might be fixable. Contrast is too weak, but there's also a bit of noise visible, and that tends to show up more if you change the contrast.
One more question, Earlier today I took a photo of the RAF red arrows, The registration is not visible and its a photo of them flying in formation, What should I put the reg/aircraft down as. Should I just select a random reg of one of the aircraft and use that or should I do something else?
You have two options, either the closes aircraft, or the one in the lead of the formation. Anything else will be a bad info rejection.
Hello, would this be rejected for (CMOS dust spots/dirty scan) as I can't quite tell, I have removed from the queue for now till I get a more professional opinion
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment