Announcement

Collapse
No announcement yet.

Pre-screening Advice Please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by LewisW295 View Post
    Hi there,

    Lesson learnt the hard way, save your work before cropping it....

    Anyway, I have now taken a second look at N142TW and cleaned it and re-edited it. The PA28 has also been re-edited due to ballsing up the original crop.

    Click image for larger version

Name:	G-CEZI Crop.jpg
Views:	53
Size:	659.8 KB
ID:	1101029Click image for larger version

Name:	N142TW Cropped.jpg
Views:	51
Size:	786.7 KB
ID:	1101030
    1. centering (too high), cropping/ratio, borderline soft/color
    2. centering, color, cropping/ratio

    Comment


    • #32
      Originally posted by dlowwa View Post

      1. centering (too high), cropping/ratio, borderline soft/color
      2. centering, color, cropping/ratio
      Re-centered and cropped N142TW. By ratio, I'm unsure what I did to mess that one up!

      G-CEZI has also been recropped, adjusted and resharpened.

      And for good measure, a new shot.

      Also, could you expand slightly for me on the ratio issue if it pops up again? They should be exported as a long side of 1280 from my editor which auto adjusts the short side to keep the aspect.

      Click image for larger version

Name:	G-CEZI V.2.jpg
Views:	43
Size:	727.8 KB
ID:	1101113Click image for larger version

Name:	OY-RCK 1.jpg
Views:	42
Size:	822.0 KB
ID:	1101114Click image for larger version

Name:	N142TW V.2.jpg
Views:	41
Size:	811.8 KB
ID:	1101115

      Comment


      • #33
        1. ok for me
        2. soft, color, noise, centering
        3. oversharpened, color, centering

        Originally posted by LewisW295 View Post
        Also, could you expand slightly for me on the ratio issue if it pops up again? They should be exported as a long side of 1280 from my editor which auto adjusts the short side to keep the aspect.
        There is (was) a black bar at the bottom of the frame on both images.

        Comment


        • #34
          Originally posted by dlowwa View Post

          1. ok for me
          2. soft, color, noise, centering
          3. oversharpened, color, centering



          There is (was) a black bar at the bottom of the frame on both images.
          1. Thank you, will upload it and hope for a good result.
          2. I think this one might be scrapped as it may be blurry rather than soft. I'll take a look into it another time when I'm on the PC.
          3. Is it a yellow cast on the image per chance? In regards to the centering, too low in the frame?

          Again, thank you for taking the time to look at these images for me. It's appreciated

          Comment


          • #35
            Originally posted by LewisW295 View Post
            3. Is it a yellow cast on the image per chance? In regards to the centering, too low in the frame?
            Bad color due to the strong purple fringing/chromatic aberration, and yes too low.

            Comment


            • #36
              Originally posted by dlowwa View Post

              Bad color due to the strong purple fringing/chromatic aberration, and yes too low.
              Ah! Right. Now that I can look into! Thanks buddy.

              Comment


              • #37
                Originally posted by dlowwa View Post

                1. ok for me
                2. soft, color, noise, centering
                3. oversharpened, color, centering



                There is (was) a black bar at the bottom of the frame on both images.
                Invested in LRC so thought I'd give this another attempt whilst following along to a tutorial (similar values so I may of undersharpened) Click image for larger version

Name:	20201019125926_IMG_0548.jpg
Views:	36
Size:	625.3 KB
ID:	1101245 ... Also, if I upload 1 picture now and others later, would that violate the rules of pre-screening?

                Comment


                • #38
                  Originally posted by LewisW295 View Post

                  Invested in LRC so thought I'd give this another attempt whilst following along to a tutorial (similar values so I may of undersharpened) Click image for larger version

Name:	20201019125926_IMG_0548.jpg
Views:	36
Size:	625.3 KB
ID:	1101245 ... Also, if I upload 1 picture now and others later, would that violate the rules of pre-screening?
                  A bit soft, and fringing/aberration somewhat less noticeable, but still there.

                  Comment


                  • #39
                    Originally posted by dlowwa View Post

                    A bit soft, and fringing/aberration somewhat less noticeable, but still there.
                    Hmm. I'm using the remove Remove CA function so I think it may need some manual input to correct. Back to tutorials I go!

                    Comment


                    • #40
                      Originally posted by dlowwa View Post

                      A bit soft, and fringing/aberration somewhat less noticeable, but still there.
                      Hows this for the CA? Also added sharpening.

                      Edit: 3 fresh edits from the new workspace! Click image for larger version

Name:	20200920143134_IMG_0181.jpg
Views:	35
Size:	613.8 KB
ID:	1101253Click image for larger version

Name:	20201019123220_IMG_0532.jpg
Views:	34
Size:	588.3 KB
ID:	1101254Click image for larger version

Name:	20201019125054_IMG_0536.jpg
Views:	34
Size:	562.1 KB
ID:	1101255

                      Click image for larger version  Name:	20201019125926_IMG_0548.jpg Views:	0 Size:	596.8 KB ID:	1101250

                      Comment


                      • #41
                        Originally posted by LewisW295 View Post

                        Hows this for the CA? Also added sharpening.

                        Edit: 3 fresh edits from the new workspace! Click image for larger version

Name:	20200920143134_IMG_0181.jpg
Views:	35
Size:	613.8 KB
ID:	1101253Click image for larger version

Name:	20201019123220_IMG_0532.jpg
Views:	34
Size:	588.3 KB
ID:	1101254Click image for larger version

Name:	20201019125054_IMG_0536.jpg
Views:	34
Size:	562.1 KB
ID:	1101255

                        Click image for larger version Name:	20201019125926_IMG_0548.jpg Views:	0 Size:	596.8 KB ID:	1101250
                        1-3. soft to very soft
                        4. acceptable for me

                        Comment


                        • #42
                          Originally posted by dlowwa View Post

                          1-3. soft to very soft
                          4. acceptable for me
                          Re-sharpened and new export settings in LRC. Improvement or still too soft? Also added another PA38 (different registration) Click image for larger version

Name:	IMG_0183.jpg
Views:	32
Size:	517.0 KB
ID:	1101302

                          Click image for larger version  Name:	20200920143134_IMG_0181.jpg Views:	0 Size:	575.7 KB ID:	1101301Click image for larger version  Name:	20201019123220_IMG_0532.jpg Views:	0 Size:	629.9 KB ID:	1101299Click image for larger version  Name:	20201019125054_IMG_0536.jpg Views:	0 Size:	623.1 KB ID:	1101300
                          Attached Files

                          Comment


                          • #43
                            Originally posted by LewisW295 View Post

                            Re-sharpened and new export settings in LRC. Improvement or still too soft? Also added another PA38 (different registration) Click image for larger version  Name:	IMG_0183.jpg Views:	0 Size:	517.0 KB ID:	1101302

                            Click image for larger version Name:	20200920143134_IMG_0181.jpg Views:	0 Size:	575.7 KB ID:	1101301Click image for larger version Name:	20201019123220_IMG_0532.jpg Views:	0 Size:	629.9 KB ID:	1101299Click image for larger version Name:	20201019125054_IMG_0536.jpg Views:	0 Size:	623.1 KB ID:	1101300
                            1. soft, color, cropping/ratio
                            2. ok for me
                            3. soft/blurry
                            4. cropping/ratio

                            Comment


                            • #44
                              Originally posted by dlowwa View Post

                              1. soft, color, cropping/ratio
                              2. ok for me
                              3. soft/blurry
                              4. cropping/ratio
                              1. Is there still some purple fringing or due to the reflection on the glass?
                              2. Thank you. That'll join the que tonight then.
                              3. Concerned with this one. Obviously a scrapper if it's blurred. I'll sharpen it further tonight but this was taken during the takeoff roll so blur isn't obvious to me. Any further pointers in this one would be great but if its a scrapper, I'll scrap it. Not great at discerning blur or softness on some images.
                              4. A black bar hiding somewhere or just incorrect sizing? I'll re-export it later after investigating.

                              Thank you for your help again bud

                              Comment


                              • #45
                                Originally posted by LewisW295 View Post

                                1. Is there still some purple fringing or due to the reflection on the glass?
                                2. Thank you. That'll join the que tonight then.
                                3. Concerned with this one. Obviously a scrapper if it's blurred. I'll sharpen it further tonight but this was taken during the takeoff roll so blur isn't obvious to me. Any further pointers in this one would be great but if its a scrapper, I'll scrap it. Not great at discerning blur or softness on some images.
                                4. A black bar hiding somewhere or just incorrect sizing? I'll re-export it later after investigating.

                                Thank you for your help again bud
                                1. Fringing is due to your lens (quality).
                                3. Couldn't tell you without seeing the original
                                4. 1.3 Image Formats https://forums.jetphotos.com/forum/a...es-new-version

                                Comment

                                Working...
                                X