Announcement

Collapse
No announcement yet.

Should this be moved down a little?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Should this be moved down a little?

    Hi, this is my first topic, don’t know if I’m doing this right. But should this pic be moved down where the nose is below the line?https://www.jetphotos.com/members/sh...1607244315.jpg

  • #2
    Originally posted by bhm.aviation View Post
    Hi, this is my first topic, don’t know if I’m doing this right. But should this pic be moved down where the nose is below the line?https://www.jetphotos.com/members/sh...1607244315.jpg
    Yes but the image is also soft so would not be acceptable imo.
    For future reference, you need to make sure that (in general) there is equal distance between the lowest point of the aircraft and the bottom edge of the image, and the highest point of the aircraft and the top edge of the image. Same goes with the left and right of the image. Of course there may be exceptions to this (like in this image: https://www.jetphotos.com/photo/9955462), but it is a good "rule of thumb" to follow.

    Also make sure you read this: https://forums.jetphotos.com/forum/a...ning-from-crew carefully before requesting any other pre-screening and/or editing advice.

    Cheers,
    Ben Long

    Comment


    • #3
      Originally posted by Ben Long View Post

      Yes but the image is also soft so would not be acceptable imo.
      For future reference, you need to make sure that (in general) there is equal distance between the lowest point of the aircraft and the bottom edge of the image, and the highest point of the aircraft and the top edge of the image. Same goes with the left and right of the image. Of course there may be exceptions to this (like in this image: https://www.jetphotos.com/photo/9955462), but it is a good "rule of thumb" to follow.

      Also make sure you read this: https://forums.jetphotos.com/forum/a...ning-from-crew carefully before requesting any other pre-screening and/or editing advice.

      Cheers,
      Ben Long
      Ok thank you!

      Comment

      Working...
      X