Pre-screnning + Help

[RobertMahar15]

Top right corner a bit darker than the rest of the frame, but not sure if that's vignetting or just the tone of the sky. Wouldn't be strong enough to be an issue for me in any case.

alright, thank you so much Dana!

[RobertMahar15]

May I please get a pre-screen for the following image?

thank you!

[dlowwa]

May I please get a pre-screen for the following image?

Would be ok for me.

[RobertMahar15]

Hello,

May I please get a pre-screen for the following image? My main concerns are sharpness and the horizon

thank you!,

[dlowwa]

Hello,

May I please get a pre-screen for the following image? My main concerns are sharpness and the horizon

Slight bit of heat haze, and horizon is hard to tell, but might need a touch of ccw.

[RobertMahar15]

Slight bit of heat haze, and horizon is hard to tell, but might need a touch of ccw.

could the heat haze cause a rejection?

[dlowwa]

could the heat haze cause a rejection?

Probably not.

[RobertMahar15]

Hello!,

I am almost certain that the image attached below is heat hazed, But Im curious if it's enough to cause a soft rejection.

thank you!

[dlowwa]

Hello!,

I am almost certain that the image attached below is heat hazed, But Im curious if it's enough to cause a soft rejection.

Not that bad. Borderline soft, but acceptable for me.

[RobertMahar15]

Hello!,

I was curious if this crop was acceptable, and if a 4:3 image format was acceptable for JP.

Thank you so much!

[RobertMahar15]

Hello!,

I want to re-edit this rejection and add it back to the queue to hopefully get accepted the second time around, But I would like to know during post-processing what should I use as a reference this time? I originally tried to use the poles in the back, but as we can see that didn’t work

Thank you so much!

[dlowwa]

Hello!,

I was curious if this crop was acceptable, and if a 4:3 image format was acceptable for JP.

A bit awkward, but not terrible, so maybe borderline chance.

Hello!,

I want to re-edit this rejection and add it back to the queue to hopefully get accepted the second time around, But I would like to know during post-processing what should I use as a reference this time? I originally tried to use the poles in the back, but as we can see that didn’t work

Thank you so much!

Image has already been appealed. As such, there will be no further comments from crew.

[RobertMahar15]

A bit awkward, but not terrible, so maybe borderline chance.



Image has already been appealed. As such, there will be no further comments from crew.

Alright thank you, but there was no comments that atleast I can’t see that were left by the Appeal screener….

[dlowwa]

Alright thank you, but there was no comments that atleast I can’t see that were left by the Appeal screener….

Yes, appeals made without comments are simply rejected without comment as well.

[RobertMahar15]

Yes, appeals made without comments are simply rejected without comment as well.

understood, thanks.



If I could ask, Would the heat coming from the left engine onto the wing be an issue?, and cause a rejection?