Advice/Confirmation requested by jakerepp

[jakerepp]

Can you pre-screen these for me please? All moderately heavy crops (except the PC12) so unsure if they are sharp enough. Unsure about exposure on Pilatus.

All hot photos if it makes a difference

[dlowwa]

Can you pre-screen these for me please? All moderately heavy crops (except the PC12) so unsure if they are sharp enough. Unsure about exposure on Pilatus.

All hot photos if it makes a difference

1. dark, dirty, borderline soft
2-5. ok for me

[jakerepp]

1. dark, dirty, borderline soft
2-5. ok for me

Thanks. I ended up exporting 1 at 1024px and it looks good there.

[jakerepp]

This had a little haze, not sure if it's hidden enough here. Does it look okay, overall?

[dlowwa]

This had a little haze, not sure if it's hidden enough here. Does it look okay, overall?

It's noticeable. Can't really hide it with thin lines like that on the livery/paint job.

[jakerepp]

Prescreening for these please. Not sure if the quality was retained enough on the SR20s due to the heavy crop and unsure if exposure/crop is okay for the Apaches

[dlowwa]

Prescreening for these please. Not sure if the quality was retained enough on the SR20s due to the heavy crop and unsure if exposure/crop is okay for the Apaches

First two should be ok at 1024. AH64s tricking because of the white building in the background, but would be ok for me.

[jakerepp]

First two should be ok at 1024. AH64s tricking because of the white building in the background, but would be ok for me.

Yeah that building is a little blinding. They're both new registrations so hopefully that helps out. Thanks!

[jakerepp]

Just got two new reg Chinooks. First one was accepted https://www.jetphotos.com/photo/10972074

Second was rejected for cut-off, but I'm very confused as to why. Could you help me sort this out?

https://www.jetphotos.com/viewqueued_b.php?id=11085552

[dlowwa]

Just got two new reg Chinooks. First one was accepted https://www.jetphotos.com/photo/10972074

Second was rejected for cut-off, but I'm very confused as to why. Could you help me sort this out?

https://www.jetphotos.com/viewqueued_b.php?id=11085552

Awkward crop. If you're going to crop the rotors, crop tighter to the body like on the accepted image.

[jakerepp]

Awkward crop. If you're going to crop the rotors, crop tighter to the body like on the accepted image.

I sort of came to that conclusion, just wasn't sure why the rejection reason was cut off and not crop, but it makes sense.

[jakerepp]

Awkward crop. If you're going to crop the rotors, crop tighter to the body like on the accepted image.

Does this one work? Chinooks look odd when centering using the main fuselage so I centered more using the gear and the rotor mounts.

[dlowwa]

Does this one work? Chinooks look odd when centering using the main fuselage so I centered more using the gear and the rotor mounts.

I'd crop a bit tighter, but yeah almost works.

[jakerepp]

Can you help me out with this one? The horizon looks fine to me

https://www.jetphotos.com/viewqueued_b.php?id=11114344

[dlowwa]

Can you help me out with this one? The horizon looks fine to me
https://www.jetphotos.com/viewqueued_b.php?id=11114344

Screener(s) indicated a little CW rotation was needed.