Charlie Chang - editing/rejection advice

[Charlie Chang]

Can anyone pre-screen these photos? Thanks!

[dlowwa]

Hello, I just received a photo got rejected, and I think it is unreasonable
Because according to JP rule, it should be accepted.
Link of rejected photo:https://www.jetphotos.com/viewqueued_b.php?id=10429643
I read the guide of JP, it said :
The following will be accepted as hot for 48 hours after the first photo got accepted:


1. New aircraft type produced by a manufacturer. (including subtypes)
2. New aircraft type / subtype for an airline or air force. (including roll-outs or test flights at the factory)

My photo should be in 48h rule, but it doesn't.
Can anyone explain this? Thanks

Yes, it seems you uploaded it only 41 hours after the first one was accepted. I will add it.

[Charlie Chang]

Hello, I just received a photo got rejected, and I think it is unreasonable
Because according to JP rule, it should be accepted.
Link of rejected photo:https://www.jetphotos.com/viewqueued_b.php?id=10429643
I read the guide of JP, it said :
The following will be accepted as hot for 48 hours after the first photo got accepted:


1. New aircraft type produced by a manufacturer. (including subtypes)
2. New aircraft type / subtype for an airline or air force. (including roll-outs or test flights at the factory)

My photo should be in 48h rule, but it doesn't.
Can anyone explain this? Thanks

[dlowwa]

Thank you very much for your pre-screening!
I remembered that I did not change highlight and shadow of picture 5.
And I did not see halo around the aircraft, if it is still overprocessed, is it possible to be re-edit to make this photo accept?

If halos are caused by processing, then different/better processing should address the issue, yes.

[Charlie Chang]

1. dirty
2. soft, contrast
3. ok for me
4. soft, borderline contrast
5. soft, overprocessed

Thank you very much for your pre-screening!
I remembered that I did not change highlight and shadow of picture 5.
And I did not see halo around the aircraft, if it is still overprocessed, is it possible to be re-edit to make this photo accept?

[dlowwa]

Can anyone pre-screen these photos? Thanks!

1. dirty
2. soft, contrast
3. ok for me
4. soft, borderline contrast
5. soft, overprocessed

[Charlie Chang]

Can anyone pre-screen these photos? Thanks!

[dlowwa]

Thanks for your pre-screening!
I have questions about photo1 and 2.
What is the appropriate reference to make sure photo one not to be horizon unlevel?
Is it possible to be fixed (increase contrast) of photo 2?
Would you mind to answer my questions? thanks!

1. verticals in center of the frame appear to leaning a bit left
2. poor contrast due to overcast conditions. not sure more editing can help.

[Charlie Chang]

1. soft, horizon
2. soft, contrast
3. ok for me.
4. borderline soft/contrast
5. ok for me

Thanks for your pre-screening!
I have questions about photo1 and 2.
What is the appropriate reference to make sure photo one not to be horizon unlevel?
Is it possible to be fixed (increase contrast) of photo 2?
Would you mind to answer my questions? thanks!

[dlowwa]

Can anyone pre-screen these photos? Thanks!

1. soft, horizon
2. soft, contrast
3. ok for me.
4. borderline soft/contrast
5. ok for me

[Charlie Chang]

Can anyone pre-screen these photos? Thanks!

[dlowwa]

rejection advice
I just got a photo rejected by rejection JPG compression artefacts
But I checked the size of this photo, the size is 565kb, I think the compression is okay.......
What is the standard of JPG compression artefacts? Photo size smaller than 600kb?
Link of rejected photo: https://www.jetphotos.com/viewqueued_b.php?id=10368138
I hope someone could give me some advice of it, thanks!

Maybe a bit noisy, but there is no issue with compression. I've added the image.

[Charlie Chang]

rejection advice
I just got a photo rejected by rejection JPG compression artefacts
But I checked the size of this photo, the size is 565kb, I think the compression is okay.......
What is the standard of JPG compression artefacts? Photo size smaller than 600kb?
Link of rejected photo: https://www.jetphotos.com/viewqueued_b.php?id=10368138
I hope someone could give me some advice of it, thanks!

[dlowwa]

My friend has a photo that that he is very confused , and he can't post his photo to the forum due to VPN issue.
Can anyone pre-screen his photo?

Image is heat hazed/soft.

[Charlie Chang]

My friend has a photo that that he is very confused , and he can't post his photo to the forum due to VPN issue.
Can anyone pre-screen his photo?