Announcement

Collapse
No announcement yet.

Semjons Fiskiss - prescreening request / editing advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    Originally posted by SemjonsF View Post

    Still don't really understand to be honest.
    Hopefully then this one is fine enough
    It sadly got rejected for too much/too little contrast. Should I try appealing and if so, how should I explain it? Can you give some advice so that I could be 100% sure I won't have any problems with contrast in the future?

    And I still need advice on dust spots with Wizz Air above

    Thanks!

    Comment


    • #92
      Originally posted by SemjonsF View Post

      It sadly got rejected for too much/too little contrast. Should I try appealing and if so, how should I explain it? Can you give some advice so that I could be 100% sure I won't have any problems with contrast in the future?
      I disagree with that rejection, but that's how it goes sometimes. You can appeal, but my opinion won't matter (unless I get the appeal).

      Originally posted by SemjonsF View Post
      And I still need advice on dust spots with Wizz Air above
      I usually use the clone stamp tool.

      Comment


      • #93
        Originally posted by dlowwa View Post

        I disagree with that rejection, but that's how it goes sometimes. You can appeal, but my opinion won't matter (unless I get the appeal).



        I usually use the clone stamp tool.
        Got it accepted, thanks

        I have tried using Ps and clone stamp tool and do you think this is now acceptable? Both edit and dust spot removal. I have encircled them where they were approximately.
        Also I usually use LrC for editing so didn't really know how to use it properly. Will really appreciate if you can give advice or link for a video on clone stamp tool ,^^,
        Attached Files

        Comment


        • #94
          Originally posted by SemjonsF View Post

          Got it accepted, thanks

          I have tried using Ps and clone stamp tool and do you think this is now acceptable? Both edit and dust spot removal. I have encircled them where they were approximately.
          Also I usually use LrC for editing so didn't really know how to use it properly. Will really appreciate if you can give advice or link for a video on clone stamp tool ,^^,
          Still see a few marks in the sky, but not sure they would be enough for a rejection.

          Comment


          • #95
            Finally have some motivation to edit. Is this one good?
            Attached Files

            Comment


            • #96
              Originally posted by SemjonsF View Post
              Finally have some motivation to edit. Is this one good?
              No.

              Comment


              • #97
                Prescreening, please
                Attached Files

                Comment


                • #98
                  Originally posted by SemjonsF View Post
                  Prescreening, please
                  Not a screener but it looks like it’s cut-off. Maybe will be rejected

                  Comment


                  • #99
                    Originally posted by SemjonsF View Post
                    Prescreening, please
                    Borderline soft/cut off.

                    Comment


                    • Yes it is cut off but intentionally, thought if you cut off enough it would count as some sort of a close up
                      Is this one better then? And is softness less noticeable here due to it just being a larger crop?
                      Attached Files

                      Comment


                      • Originally posted by SemjonsF View Post
                        Yes it is cut off but intentionally, thought if you cut off enough it would count as some sort of a close up
                        Is this one better then? And is softness less noticeable here due to it just being a larger crop?
                        Softness still noticeable.

                        Comment


                        • Originally posted by dlowwa View Post

                          Softness still noticeable.
                          Alright. So it's still borderline. But would it likely be yes or no? Also about the crop?

                          Comment


                          • Originally posted by SemjonsF View Post

                            Alright. So it's still borderline. But would it likely be yes or no? Also about the crop?
                            Borderline = maybe yes, maybe no. Crop is ok.

                            Comment


                            • Originally posted by dlowwa View Post

                              Borderline = maybe yes, maybe no. Crop is ok.
                              Sorry, you didn't understand me. Is this one more likely to be a yes or a no?
                              And would my first photo actually be fine on the crop as if, would it be considered a close up?

                              Comment


                              • Originally posted by SemjonsF View Post

                                Sorry, you didn't understand me. Is this one more likely to be a yes or a no?
                                And would my first photo actually be fine on the crop as if, would it be considered a close up?
                                Sorry, you didn't understand me.

                                Borderline = 50% yes, 50% no
                                Probably ok = 75% yes, 25% no
                                Probably not ok = 25% yes, 75% no
                                Ok = 100% yes (for me)
                                Not ok = 0% yes

                                Comment

                                Working...
                                X