Fernaldy - Prescreening / Editing Advice

[Fernaldy]

Hi Alex

Thank you for your advice

Best Regards

Fernaldy

[Alex - Spot-This !]

1) a tad soft
2) looks ok
3) looks ok

[Fernaldy]

Hello

I need an advice for this photo please

[Fernaldy]

Hi Alex.

Happy to hear from you and thank you for your advice.

Best Regards

Fernaldy

[Alex - Spot-This !]

these look acceptable to me

[Fernaldy]

Hello.

I want pre screen 3 images please

[Fernaldy]

Okayy. Lovely. I will not upload that photo. Thanks

[Stanley JH]

Not a screener, but the photo has heat haze, then it will already be rejected. It cannot be fixable (cmiiw).

[Fernaldy]

Hello

Please Help me with this photo. I want to ask
1. is this photo will be rejected for heat distortion because in the fuselage front or nose my feeling this photo was an heat haze there. 😐
2. Is there any CMOS dust spots again as I have already check multiple times and already clean it.
Thanks

[Fernaldy]

You can use the check for dust feature in the upload page. From my side I don't see many significant spots, but banding in the sky is perceptible, probably caused by compression or editing from an already downsized image? For contrast yes, I'd say bring down the black tones, make the darks darker to improve it, make sure the histogram touches the left side.

Okayy. Thanks mate

[AMGEnthusiast63]

Okayy. Thanks for the contrast. What I need is only reduce the black tone brightness, right in editing software? And with the Dust spots, please help me if the photo is still dirty or not because I am struggling. Thank you.

You can use the check for dust feature in the upload page. From my side I don't see many significant spots, but banding in the sky is perceptible, probably caused by compression or editing from an already downsized image? For contrast yes, I'd say bring down the black tones, make the darks darker to improve it, make sure the histogram touches the left side.

[Fernaldy]

Not a screener but seems a little bit high in the frame. Also I'd bring down the dark tone brightness a bit, give it a bit more contrast. From the histogram, black tones are a tiny bit lacking.

Okayy. Thanks for the contrast. What I need is only reduce the black tone brightness, right in editing software? And with the Dust spots, please help me if the photo is still dirty or not because I am struggling. Thank you.

[AMGEnthusiast63]

Not a screener but seems a little bit high in the frame. Also I'd bring down the dark tone brightness a bit, give it a bit more contrast. From the histogram, black tones are a tiny bit lacking.

[Fernaldy]

Moreover, I also need advice about this photo too, especially CMOS Dust spots. Thanks.

[Fernaldy]

Not a screener, but that photo looks soft to me

Okayy. Thank you. A bit struggle. I try to create sharpening until 110, detail 40 and luminance 25.