Announcement

Collapse
No announcement yet.

Dust in picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dust in picture

    This is a picture of me landing a Cessna 152 N65401 on RWY 04 at KPIE. I scanned this image using a crappy old film scanner, can't afford to go fully digital . The dust particles are so small that I really can't see them just looking at the negative. So, what software is good for removing dust?



    When life gives you lemons, make lemonade.

  • #2
    Oops, here it is. My original file name had a space in it.


    When life gives you lemons, make lemonade.

    Comment


    • #3
      Re: Dust in picture

      Originally posted by tbirdman429
      can't afford to go fully digital.... what software is good for removing dust?
      Dont spend your bucks for software or anything thats gonna enhance your Film photography. Save for a digital "get-up". You won't be dissapointed.

      -Adam

      Comment


      • #4
        and you might want to go flying a little lower

        Comment


        • #5
          Originally posted by Spotter
          and you might want to go flying a little lower

          I was trying to avoid the wake turbulance from an A320 that landed on 35R.
          When life gives you lemons, make lemonade.

          Comment


          • #6
            That airport can support an A320?

            Comment


            • #7
              St. Pete is an awesome airport. I've flown in there many times.
              To answer your questions Dan...They get alot of DC-8 and 757 traffic too for UPS.
              Also Coast Guard C-130s as its a big USCG base.
              Try to catch me flyin dirty...

              Comment


              • #8
                Would a photo like this be accepted if it didn't include the dust?
                When life gives you lemons, make lemonade.

                Comment


                • #9
                  Hellooo, anybody still here?!
                  When life gives you lemons, make lemonade.

                  Comment


                  • #10
                    there has to be a source for the dust, try cleaning your scanner with paper towel and windex, and your lens also!
                    Only the dead have seen the end of the war-Plato

                    Comment


                    • #11
                      I'll try cleaning the scanner . Easier said than done though because it is a film scanner that mounts in a 5 1/4 inch drive bay. Thanks for the input.
                      When life gives you lemons, make lemonade.

                      Comment


                      • #12
                        Honestly im not so sure it would get accepted. The colour is a little off, and its got a bit of grain in it.

                        Comment


                        • #13
                          Time to go digital...just buy a cheap digital camera.
                          ***My Blog***

                          Comment


                          • #14
                            Personaly id rather have a good quality SLR than a cheap digital. The limitations with cheap digitals p*ss me the hell off.

                            Comment


                            • #15
                              I agree with you there. I do have a 2 megapixel Concord 2000 digital camera, and I hate it with a passion . I'll take my Nikon N65 35mm SLR anyday!
                              When life gives you lemons, make lemonade.

                              Comment

                              Working...
                              X