Finally got this one accepted.
[photoid=5681366]
Thanks again to all for your help!
Georg
________
Live Sex Webshows
Announcement
Collapse
No announcement yet.
Heat Distortion - I can't see
Collapse
X
-
Hi kukkudrill
I got the following message when appealing it yesterday
---------------------------------------------------------------------------
Your appeal for photo id 841926 has been processed and has been rejected.
Admin Comments >> Georg, unfortunately, there does appear to be some heat distortion on the fuselage of the 757.
>> http://www.jetphotos.net/viewreject.php?id=841926
---------------------------------------------------------------------------
I take it as it is and already uploaded another pic.
Thanks for your help!
Georg
________
Medical MarijuanaLast edited by DRS-Spotter; 2011-09-16, 06:45.
Leave a comment:
-
Heat distortion on the tail, when it doesn't appear lower down? This is an interesting one. If you take a look at this picture of the same plane
[photoid=5616912]
you'll see paint peeling off in the same location as the apparent manipulation/heat distortion in Georg's shot. The bare metal on the fin leading edge appears not to show up in Georg's shot because the sky is the same colour. I wouldn't say this is one of Georg's best shots but I think he has been hard done by with a rejection for heat distortion.
Leave a comment:
-
Thanks for clarifying this. I almost thought that it's not just outside temperature
Georg
________
Nexium settlement infoLast edited by DRS-Spotter; 2011-09-16, 06:44.
Leave a comment:
-
Originally posted by DRS-SpotterBut I can't see the heat distortion...temperature was around 2 degrees so it isn't possible at all?!?!?!?
Gerardo
Leave a comment:
-
Hi.
Appealed it and it was rejected with the message that some heat is on the fuselage. Willt ry another pic.
Thanks for your comments.
Georg
________
YuliaNa69Last edited by DRS-Spotter; 2011-09-16, 06:44.
Leave a comment:
-
Sam pointed it out...take a look at the leading edge of the tail. There is obviously something wrong there, whether it be manipulation or heat distortion...something is off.
Leave a comment:
-
As you said yourself, it was only around 2 degrees, the only things that cause heat at that temperature are the engines. Would the cloning ( if it was cloned ) not be digital manipulation ??? I personally think the rear angle does not do the aircraft justice, thats only my opinion though !!
Leave a comment:
-
this is sure the livery. Looked on pics from other angels and there it's too.
[photoid=5678660]
Georg
________
Meowmeow camLast edited by DRS-Spotter; 2011-09-16, 06:43.
Leave a comment:
-
All I can say is that the tail looks like it's been cloned abit and im not sure if that's the livery or not! -
Leave a comment:
-
Yes, but that's normal on taxiing aircaft...there are thousends of pics like that on Jnet.
Georg
________
HotSexyDoll liveLast edited by DRS-Spotter; 2011-09-16, 06:42.
Leave a comment:
-
Hallo Georg,
what they probably mean are the jet engine exhaust fumes which are very noticeable between the left engine and undercarraige and especially on the dba 737 in the background.
Rgds,
MK
Leave a comment:
-
Thanks. I want to appeal too, but would like to have few more oppinions on this.
Georg
________
BeautyGirLLast edited by DRS-Spotter; 2011-09-16, 06:42.
Leave a comment:
-
Originally posted by DRS-SpotterHi.
Got this pic rejected for heat distortion
http://www.jetphotos.net/viewreject.php?id=841926
But I can't see the heat distortion...temperature was around 2 degrees so it isn't possible at all?!?!?!? Please help me to understand where the heat distortion is.
Thanks.
Georg
Leave a comment:
-
Heat Distortion - I can't see
Hi.
Got this pic rejected for heat distortion
JetPhotos.com is the biggest database of aviation photographs with over 5 million screened photos online!
But I can't see the heat distortion...temperature was around 2 degrees so it isn't possible at all?!?!?!? Please help me to understand where the heat distortion is.
Thanks.
Georg
________
E-cigsLast edited by DRS-Spotter; 2011-09-16, 06:41.Tags: None
Leave a comment: