Announcement

Collapse
No announcement yet.

Help with a rejection please....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will M
    replied
    -
    Last edited by Will M; 2006-11-07, 19:36. Reason: Misread it

    Leave a comment:


  • Macca
    replied
    Excellent thanks Wallace, i will have a read through that, and try to pick up some new techinques.




    Mac

    Leave a comment:


  • wwshack
    replied
    Shaprening suggestion

    A very kind screener gave me a tip about a similar problem, try selective sharpening. Target the bits that need it and ease up on the bits that don't, e.g. the titles.

    Try this tutorial. http://www.ophrysphotography.co.uk/p...sharpening.htm
    This is where I learned the technique.
    One word or caution, resist the temptation just to sharpen the aircraft, give everything bar the sky a touch of sharpening in one way or another.

    Leave a comment:


  • Macca
    replied
    Noted thanks Sam, will redo it but reduce the amount of sharpening.

    Brgds.

    Mac

    Ok, reduced USM and used some highlights, think its better now. Cheers for the help,its in the q now hope it makes it this time, as its a rare beast.

    http://www.jetphotos.net/viewqueued_b.php?id=1200054



    Brgds.

    Leave a comment:


  • Sam at MAN
    replied
    It's a tad too bright. And if you look at the titles they seem 'jaggie'. Start again and dont sharpen as much

    Leave a comment:


  • RingwaySam
    replied
    Hi Macca,

    Nice shot there! You may be able to save this picture if you use Highlight's just reduce the exposer, although in my opinion it's not to bad. Fixing the sharpening, that's fairly straight forward. If you need help editing post the original

    Leave a comment:


  • Macca
    started a topic Help with a rejection please....

    Help with a rejection please....

    Hi all,

    Rejected for overexposed and over sharpened, any suggestions of how this shot can be saved will be gratefully received !

    http://www.jetphotos.net/viewreject_b.php?id=1191424


Working...
X