Announcement

Collapse
No announcement yet.

Can someone explain the "Photo Edges" rejection Please?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can someone explain the "Photo Edges" rejection Please?

    http://www.jetphotos.net/viewreject_b.php?id=1665525

    Looking for some insight. Cropped a bit high to be sure, but I'm not familiar with the other two elements.

    Thanks


    Dave Brook
    Cambridge, Ontario

  • #2
    The three are all lumped into the same category.
    And I'm gonna guess that it's the size ratio that got you.
    See this thread for further info:
    http://forums.jetphotos.net/showthread.php?t=40085
    Cheers,
    Mitch

    Comment


    • #3
      The height of the image is too short for a 3 : 2 ratio it should be 1024 X 683 Also i feel that the tail is too close to the top edge. IMHO i would also try and center the A/C lower in the frame a bit.
      Robin Guess Aviation Historian, Photographer, Web Designer.

      http://www.Jet-Fighters.Net
      http://www.Jet-Liners.Net

      Comment


      • #4
        Originally posted by Jet-fighters.Net
        The height of the image is too short for a 3 : 2 ratio it should be 1024 X 683 Also i feel that the tail is too close to the top edge. IMHO i would also try and center the A/C lower in the frame a bit.
        What that guy wrote! Nothing to add at all!!

        Gerardo
        My photos on Flickr www.flickr.com/photos/geridominguez

        Comment

        Working...
        X