Unlevel. But where is the vertical?

[Bart Bandy]

I tried using the centre post of the bridge as vertical. The left support angles in at the top so it is out. The bridge is an uphill taxiway. The poles in the back all seem to bend in different directions.

http://www.jetphotos.net/viewreject_b.php?id=2572638

Any ideas?

Thanks

[Tim Bowrey]

The bridge itself anyway? How does that look?

[gunna64]

I'd say it needs a slight shift CCW - judging by the uprights on the bridge and the square building in the background.

[PMN]

To me the very obvious vertical is the bridge support right in the middle of the frame, which is leaning slightly to the right so it needs clockwise rotation, not counter-clockwise. If you use that as the vertical and level to it, it should be fine.

Paul

[brianw999]

To me the very obvious vertical is the bridge support right in the middle of the frame, which is leaning slightly to the right so it needs clockwise rotation, not counter-clockwise. If you use that as the vertical and level to it, it should be fine.

Paul

Sorry Paul, but I have to disagree. I checked it 5 times and 5 times came up with 0.5 CCW.

[Bart Bandy]

Thanks for the replies. It's in the screener queue for the last time. I thought it gave a neat perspective of size.

Cheers

[Bart Bandy]

Mission accomplished.

Thanks

http://www.jetphotos.net/viewphoto.p...6619729&nseq=1