Announcement

Collapse
No announcement yet.

Kyle McKinlay - Editing Advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Noise/compression are my guess for this one, but I thought I'd just get a second opinion. Thank you very much as always.

    Click image for larger version

Name:	G-STBK_WSSS_4024.jpg
Views:	1
Size:	745.6 KB
ID:	1028666

    Comment


    • Originally posted by KyleMcKinlay View Post
      Noise/compression are my guess for this one, but I thought I'd just get a second opinion. Thank you very much as always.

      [ATTACH=CONFIG]16591[/ATTACH]
      Noise is indeed the main killer here.
      My photos on Flickr www.flickr.com/photos/geridominguez

      Comment


      • Thanks LX-A343. Does this show any acceptable improvement? Thank you.

        Click image for larger version

Name:	G-STBK_WSSS_V2_4024.jpg
Views:	1
Size:	426.0 KB
ID:	1028672

        Comment


        • Originally posted by KyleMcKinlay View Post
          Thanks LX-A343. Does this show any acceptable improvement? Thank you.

          [ATTACH=CONFIG]16600[/ATTACH]
          Better, but still borderline for me.

          Comment


          • How are these? They are all different aircraft. Thank you

            Click image for larger version

Name:	A6-EGO_EGPF_4660.jpg
Views:	1
Size:	554.8 KB
ID:	1028744
            Click image for larger version

Name:	A6-ENE_EGPF_4678.jpg
Views:	1
Size:	548.2 KB
ID:	1028746
            Click image for larger version

Name:	A6-ENN_EGPF_4735.jpg
Views:	1
Size:	554.7 KB
ID:	1028745

            Comment


            • Originally posted by KyleMcKinlay View Post
              How are these? They are all different aircraft. Thank you

              [ATTACH=CONFIG]16677[/ATTACH]
              [ATTACH=CONFIG]16679[/ATTACH]
              [ATTACH=CONFIG]16678[/ATTACH]
              Slight heat haze on the first, but quality ok otherwise. Tugs are generally allowed if towing aircraft, but it's blocking a significant amount of the aircraft on the second so borderline for obstruction.

              Comment


              • Okay, I had a feeling that might have been the issue with no2. In that case, due to the long queue wait time, could I also upload this image a few hours later and if no2 gets accepted, then I will delete no4 (below) from the queue? Thanks dlowwa!

                Click image for larger version

Name:	A6-ENE_EGPF_4684.jpg
Views:	1
Size:	457.2 KB
ID:	1028756

                Comment


                • Originally posted by KyleMcKinlay View Post
                  Okay, I had a feeling that might have been the issue with no2. In that case, due to the long queue wait time, could I also upload this image a few hours later and if no2 gets accepted, then I will delete no4 (below) from the queue? Thanks dlowwa!

                  [ATTACH=CONFIG]16689[/ATTACH]
                  Your choice, but if we see two similar image in the queue, they can both be rejected for similar, even if the second one hasn't been screened yet. For that reason, I'd advise against doing that.

                  Comment


                  • Decided to just go for the first image that had the tug, and can always upload the other later if the first is rejected. Thanks for the information on that one though! How are these? Many thanks as always for your time!

                    Click image for larger version

Name:	G-EZBE_EGPF_4721.jpg
Views:	1
Size:	690.3 KB
ID:	1028787
                    Click image for larger version

Name:	G-TCDL_EGPF_4465.jpg
Views:	1
Size:	476.1 KB
ID:	1028788

                    Comment


                    • Originally posted by KyleMcKinlay View Post
                      Decided to just go for the first image that had the tug, and can always upload the other later if the first is rejected. Thanks for the information on that one though! How are these? Many thanks as always for your time!

                      [ATTACH=CONFIG]16728[/ATTACH]
                      [ATTACH=CONFIG]16729[/ATTACH]
                      Some minor issues (noise/sharpening & contrast, respectively), but nothing I would reject them over.

                      Comment


                      • How is this one? Many thanks

                        Click image for larger version

Name:	A6-EBG_EGPF_5085.jpg
Views:	1
Size:	517.3 KB
ID:	1028812

                        Comment


                        • Originally posted by KyleMcKinlay View Post
                          How is this one? Many thanks

                          [ATTACH=CONFIG]16755[/ATTACH]
                          Likely a rejection for soft/noise.

                          Comment


                          • Thanks dlowwa. That's something I need to be careful of then, as this angle tends to always have similar issues. Hopefully this shows some improvement? Thanks for your time

                            Click image for larger version

Name:	A6-EBG_EGPF_V2_5085.jpg
Views:	1
Size:	424.6 KB
ID:	1028815

                            Comment


                            • Originally posted by KyleMcKinlay View Post
                              Thanks dlowwa. That's something I need to be careful of then, as this angle tends to always have similar issues. Hopefully this shows some improvement? Thanks for your time

                              [ATTACH=CONFIG]16759[/ATTACH]
                              Looks good enough to me.
                              My photos on Flickr www.flickr.com/photos/geridominguez

                              Comment


                              • Great. Thanks LX-A343

                                Comment

                                Working...
                                X