Announcement

Collapse
No announcement yet.

gabrielmagacho - Editing Advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gabrielmagacho
    replied
    Originally posted by dlowwa View Post
    Doesn't really need to be corrected, as that can lead to other problems. Just make sure it's balanced (both sides lean in an equal amount).



    I didn't check all of them thoroughly, just suggesting you should once they're in queue.
    Got it!! Really thank you for helping me with this, never had a situation like this before!

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Thank you Dlowwa! Do you have any tips for correcting the horizon in those cases of Barrel distortion? Even correcting both edges I got a little confused with the horizon.
    Doesn't really need to be corrected, as that can lead to other problems. Just make sure it's balanced (both sides lean in an equal amount).

    Originally posted by gabrielmagacho View Post
    Other question, the dust spots were only in the GOL 737? Otherwise I didn't see in other photos.
    I didn't check all of them thoroughly, just suggesting you should once they're in queue.

    Leave a comment:


  • gabrielmagacho
    replied
    Originally posted by dlowwa View Post
    Not sure what kind of distortion you are referring to. Barrel distortion? In that case, best to balance both edges.

    For the images above, other than some dust spots, and maybe the horizon on one or two, I don't see any major issues.
    Thank you Dlowwa! Do you have any tips for correcting the horizon in those cases of Barrel distortion? Even correcting both edges I got a little confused with the horizon.


    Other question, the dust spots were only in the GOL 737? Otherwise I didn't see in other photos.

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Hey JP Crew,

    I'm having some trouble as using my 18-55mm lens in some photos. They all were taken in Aeroparque/SABE, in a position where I'm standing very close to the airplanes crossing the taxiway. As I started editing some photos, I noticed some distortion in the edges of the pictures. As a result of this, I see kind of distortion in airplane's fuselage, which i'm not sure if it's acceptable in JP. Could you guys check it for me, please?

    [ATTACH=CONFIG]24591[/ATTACH]
    [ATTACH=CONFIG]24592[/ATTACH]
    [ATTACH=CONFIG]24593[/ATTACH]

    These ones weren't taken it Aeroparque btw, but they would fit in JP database?

    [ATTACH=CONFIG]24594[/ATTACH]
    [ATTACH=CONFIG]24595[/ATTACH]


    Thanks a lot!
    Not sure what kind of distortion you are referring to. Barrel distortion? In that case, best to balance both edges.

    For the images above, other than some dust spots, and maybe the horizon on one or two, I don't see any major issues.

    Leave a comment:


  • gabrielmagacho
    replied
    Hey JP Crew,

    I'm having some trouble as using my 18-55mm lens in some photos. They all were taken in Aeroparque/SABE, in a position where I'm standing very close to the airplanes crossing the taxiway. As I started editing some photos, I noticed some distortion in the edges of the pictures. As a result of this, I see kind of distortion in airplane's fuselage, which i'm not sure if it's acceptable in JP. Could you guys check it for me, please?

    Click image for larger version

Name:	LV-CHQ.jpg
Views:	1
Size:	860.7 KB
ID:	1035234
    Click image for larger version

Name:	LV-CPJ.jpg
Views:	1
Size:	992.0 KB
ID:	1035235
    Click image for larger version

Name:	LV-ITK.jpg
Views:	1
Size:	917.0 KB
ID:	1035236

    These ones weren't taken it Aeroparque btw, but they would fit in JP database?

    Click image for larger version

Name:	PR-GIH.jpg
Views:	1
Size:	684.5 KB
ID:	1035237
    Click image for larger version

Name:	PR-TTP.jpg
Views:	1
Size:	879.3 KB
ID:	1035238


    Thanks a lot!

    Leave a comment:


  • gabrielmagacho
    replied
    Originally posted by dlowwa View Post
    Quality looks fine on all of those.
    Nice! Thank you for all your time and for sharing all your knowledgement since then, Dana!

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Thank you again! I would like to ask some advice in these ones too.

    [ATTACH=CONFIG]21327[/ATTACH]
    [ATTACH=CONFIG]21328[/ATTACH]
    [ATTACH=CONFIG]21329[/ATTACH]
    [ATTACH=CONFIG]21330[/ATTACH]
    Quality looks fine on all of those.

    Leave a comment:


  • gabrielmagacho
    replied
    Originally posted by dlowwa View Post
    Ok for me.
    Thank you again! I would like to ask some advice in these ones too.

    Click image for larger version

Name:	pr-ggh.jpg
Views:	1
Size:	587.1 KB
ID:	1032552
    Click image for larger version

Name:	pr-mbv.jpg
Views:	1
Size:	587.8 KB
ID:	1032553
    Click image for larger version

Name:	pr-vbx2.jpg
Views:	1
Size:	544.1 KB
ID:	1032554
    Click image for larger version

Name:	pr-myx.jpg
Views:	1
Size:	597.8 KB
ID:	1032555

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Hey! Just want a little advice on this one. Thanks!
    [ATTACH=CONFIG]21196[/ATTACH]
    Ok for me.

    Leave a comment:


  • gabrielmagacho
    replied
    Hey! Just want a little advice on this one. Thanks!
    Click image for larger version

Name:	pr-onc.jpg
Views:	1
Size:	552.1 KB
ID:	1032445

    Leave a comment:


  • gabrielmagacho
    replied
    thanks again, Dana!

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Hey! I want to know if I may have any troubles with these.

    [ATTACH=CONFIG]20375[/ATTACH]
    [ATTACH=CONFIG]20374[/ATTACH]
    [ATTACH=CONFIG]20376[/ATTACH]
    [ATTACH=CONFIG]20377[/ATTACH]

    thanks again!
    1-2 soft, contrast
    3. contrast, overexposed
    4. borderline contrast

    Leave a comment:


  • gabrielmagacho
    replied
    Hey! I want to know if I may have any troubles with these.

    Click image for larger version

Name:	PR-VBV.jpg
Views:	1
Size:	552.7 KB
ID:	1031756
    Click image for larger version

Name:	CS-TOP1.jpg
Views:	1
Size:	745.6 KB
ID:	1031755
    Click image for larger version

Name:	PR-VBU.jpg
Views:	1
Size:	719.4 KB
ID:	1031757
    Click image for larger version

Name:	PT-XPN.jpg
Views:	1
Size:	726.1 KB
ID:	1031758

    thanks again!

    Leave a comment:


  • gabrielmagacho
    replied
    Thank you again for your patience and for the advice Dlowwa!

    Leave a comment:


  • dlowwa
    replied
    Originally posted by gabrielmagacho View Post
    Asking again for a advice in a rejection. These ones shown to be too much or too little contrast. Both of three seems like they have more contrast than ideal?

    https://www.jetphotos.com/viewqueued_b.php?id=6978657
    https://www.jetphotos.com/viewqueued_b.php?id=6978651
    https://www.jetphotos.com/viewqueued_b.php?id=6978681

    Thanks in advance!!
    No, they all lack contrast due to the varying-ly overcast conditions. The second should be fixable, the third maybe, and the first probably not.

    Leave a comment:

Working...
X