Announcement

Collapse
No announcement yet.

Siddarth - Editing Advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Hi,

    Can i please get some help on this reject - https://www.jetphotos.com/viewqueued_b.php?id=8206877

    Want to confirm that the spots marked in the equalized shot below are the culprits.

    Thanks and regards,
    Siddarth
    Attached Files

    Comment


    • #62
      Originally posted by Siddarth.Bhandary View Post
      Hi,

      Can i please get some help on this reject - https://www.jetphotos.com/viewqueued_b.php?id=8206877

      Want to confirm that the spots marked in the equalized shot below are the culprits.
      That is correct.

      Comment


      • #63
        Hi,

        Can i please get some help to fix these pics:

        1. https://www.jetphotos.com/viewqueued_b.php?id=8253049. Do i need to add sharpening to the whole plane or only the decals? I felt angle of the shot is giving the decals a soft look. Any suggestion on improving contrast would also be very helpful

        Click image for larger version

Name:	LH_KIAH_Horizon.jpg
Views:	8
Size:	454.5 KB
ID:	1094177 2. https://www.jetphotos.com/viewqueued_b.php?id=8251174. What can i use as reference the verticals? The runway is slightly sloped and i had used the references shown in the attached pic.


        Thanks as always and have a great weekend.

        Regards,
        Siddarth
        Attached Files

        Comment


        • #64
          Originally posted by Siddarth.Bhandary View Post
          Hi,

          Can i please get some help to fix these pics:

          1. https://www.jetphotos.com/viewqueued_b.php?id=8253049. Do i need to add sharpening to the whole plane or only the decals? I felt angle of the shot is giving the decals a soft look. Any suggestion on improving contrast would also be very helpful
          Sharpness actually looks ok to me, and the contrast is just a bit flat. On the other hand.. not a fan of the crop, and the horizon looks off, so best I can tell you is there's some subjective disagreement happening

          [
          Originally posted by Siddarth.Bhandary View Post
          What can i use as reference the verticals? The runway is slightly sloped and i had used the references shown in the attached pic.
          Pretty much everything is leaning right on this one, so I'd have to agree CCW rotation is needed. Using the grid like that on such a small area of the frame is going to make pretty much anything look straight, so best not to rely on that.

          Comment


          • #65
            Hi,

            Can i please get some suggestions on this reject - https://www.jetphotos.com/viewqueued_b.php?id=8393556? I agree that the background is definitely heat hazed, but i used the lines and fuselage of the SR22 and they don't look distorted by the heat.

            Have a nice day!

            Regards,
            Siddarth

            Comment


            • #66
              Originally posted by Siddarth.Bhandary View Post
              Hi,

              Can i please get some suggestions on this reject - https://www.jetphotos.com/viewqueued_b.php?id=8393556? I agree that the background is definitely heat hazed, but i used the lines and fuselage of the SR22 and they don't look distorted by the heat.

              Have a nice day!

              Regards,
              Siddarth
              In fact they do, the leading edge of the wings are hardly what I would consider straight - and that's due to heat haze.

              Comment


              • #67
                Hi,

                Will rework the exposure from scratch but did not understand the 'obstruction' since no part of the aircraft is obstructed - https://www.jetphotos.com/viewqueued_b.php?id=8424271. It is the horizontal stabilizer from a MD-11 parked next to it.

                Thanks and have a good day.

                Regards,
                Siddarth

                Comment


                • #68
                  Originally posted by Siddarth.Bhandary View Post
                  Hi,

                  Will rework the exposure from scratch but did not understand the 'obstruction' since no part of the aircraft is obstructed - https://www.jetphotos.com/viewqueued_b.php?id=8424271. It is the horizontal stabilizer from a MD-11 parked next to it.

                  Thanks and have a good day.

                  Regards,
                  Siddarth
                  Is the stabilizer not obstructing the nose?

                  Comment


                  • #69
                    Originally posted by dlowwa View Post

                    Is the stabilizer not obstructing the nose?
                    Dang!!! My apologies Dana. Its the wing of the other plane obstructing the nose and overlaying exactly over the cheat line. During processing, i was looking only at the horizontal stabilizer jutting out at the top, but not obstructing the aircraft. Never realized that there was a culprit wing as well, till you mentioned it.

                    Regards,
                    Siddarth

                    Comment


                    • #70
                      Hi,

                      Need some help to fix this. Should i sharpen the entire aircraft, or only parts of it need sharpening - https://www.jetphotos.com/viewqueued_b.php?id=8497231

                      Thanks in advance.

                      Regards,
                      Siddarth

                      Comment


                      • #71
                        Originally posted by Siddarth.Bhandary View Post
                        Hi,

                        Need some help to fix this. Should i sharpen the entire aircraft, or only parts of it need sharpening - https://www.jetphotos.com/viewqueued_b.php?id=8497231

                        Thanks in advance.

                        Regards,
                        Siddarth
                        Whole aircraft, much too soft for 1920pix. Should be fine at 1280.

                        Comment


                        • #72
                          Can i please get some suggestion to fix this reject - https://www.jetphotos.com/viewqueued_b.php?id=8452178

                          The sun is gleaming on the fuselage, so any increase in exposure risks washing out parts of the fuselage.

                          Thanks and regards,
                          Siddarth

                          Comment


                          • #73
                            Originally posted by Siddarth.Bhandary View Post
                            Can i please get some suggestion to fix this reject - https://www.jetphotos.com/viewqueued_b.php?id=8452178

                            The sun is gleaming on the fuselage, so any increase in exposure risks washing out parts of the fuselage.

                            Thanks and regards,
                            Siddarth
                            Choose a different angle without the glare, and then brighten. If not possible, then still brighten, and hope the glare doesn't become washed out.

                            Comment


                            • #74
                              Can i get some help understanding the heat distortion rejection in Aviation photos - 4 million+ on JetPhotos, so as to avoid similar uploads in the future. The far background is heat distorted but the runway the plane is taxing on was not. I used the under belly line and NLG as reference.

                              Regards,
                              Siddarth

                              Comment


                              • #75
                                Originally posted by Siddarth.Bhandary View Post
                                Can i get some help understanding the heat distortion rejection in Aviation photos - 4 million+ on JetPhotos, so as to avoid similar uploads in the future. The far background is heat distorted but the runway the plane is taxing on was not. I used the under belly line and NLG as reference.

                                Regards,
                                Siddarth
                                Something is happening with the US Air Force titles near the nose and the roundel near the tail. If not heat haze, then something else? Can you post a 100% crop of one of those areas? I could tell you perhaps what the issue might be.

                                Comment

                                Working...
                                X