Balders - Prescreening required please.

[Balders]

Hi screener if you could offer any advice on the following pic's please.






1234

[B7772ADL]

Hi screener if you could offer any advice on the following pic's please.






1[ATTACH=CONFIG]11326[/ATTACH]2[ATTACH=CONFIG]11327[/ATTACH]3[ATTACH=CONFIG]11328[/ATTACH]4[ATTACH=CONFIG]11329[/ATTACH]

Hi, I just edited your thread title to match the way we want it.

All of the pics are showing some signs of compression. It's not massive so just make sure you're saving them at the highest possible quality.

Apart from that no.2, the ezy, is a little soft. All others look ok apart from as I say some compression.

[Balders]

Hi B7772ADL thanks for altering the thread title, I have had a go at the easyjet but only a small amount
Sorry in advance for the rest of the message!!
I am editing my photos in Canons DPP4 saving to a file on my desk top as a EXIF: Jpeg, Image quality is set to 10 (the Highest), output resolution is 350dpi and I resize the image here as well. I the open the file in Photoshop Elements for equaliser check, I then save to the WEB, Maximum compression quality 100%,there are three other options Progressive,Optimized & Embeded Colour Profile the optimised box is ticked by default.
sorry again for this long message but i'am a bit lost in this area!

[dlowwa]

Hi B7772ADL thanks for altering the thread title, I have had a go at the easyjet but only a small amount [ATTACH=CONFIG]11344[/ATTACH]
Sorry in advance for the rest of the message!!
I am editing my photos in Canons DPP4 saving to a file on my desk top as a EXIF: Jpeg, Image quality is set to 10 (the Highest), output resolution is 350dpi and I resize the image here as well. I the open the file in Photoshop Elements for equaliser check, I then save to the WEB, Maximum compression quality 100%,there are three other options Progressive,Optimized & Embeded Colour Profile the optimised box is ticked by default.
sorry again for this long message but i'am a bit lost in this area!

No problems with compression for this image.

[Balders]

Thanks dlowwa I will carry on saving my images as before.

[Balders]

Balders Pre screening please!!

Hi all after several rejections of late could I please have an opinion on this before I start on all the others!!

Many thanks in advance.

[Alex - Spot-This !]

Hi all after several rejections of late could I please have an opinion on this before I start on all the others!!

Many thanks in advance.

Hi,
it's a bit low but except that it looks fine

Regards
Alex

[Balders]

Thanks Alex

I'am a bit tight for space on this one but will give it a go, i will now try some of my others in a similar way.

Thanks for the quick reply.

[Balders]

Balders Pre screening please

Hi Could a screener please have look at this one for me?
Iam concerned that there is to much shadow on the plane!!
Thanks In advance

[matteolamberts]

Hi Could a screener please have look at this one for me?
Iam concerned that there is to much shadow on the plane!!
Thanks In advance[ATTACH=CONFIG]15802[/ATTACH]

Hello!

I'm not a screener, although I can give you some advice about the picture.

First of all the picture would be rejected as dirty scan because they are sensor spots visible -> check EQ version , The plane is also not centered, too low.

The picture is also underexposed -> check histogram, you have a gap on the right side and it's leaning to the left.

It's borderline with backlit and you could also add a brush of contrast.

I would also advice you to reduce the noise a little bit.

Best regards and have a great evening!

Matteo.

[Alex - Spot-This !]

Hi,
What Matteo just said is correct - and yes very borderline backlit

Kind regards
Alex

[Balders]

Thank you for the tips!!
I think I will not follow up on this one as Backlit could be a bit of a problem.

[Julian S.]

Hi could a screener have a look at these for me please.
Thanks in advance.

Hi

Please use your previous started thread for your prescreening questions. You´ll find it here: https://forums.jetphotos.com/showthr...reening-please

Thank You!

[Balders]

Oops sorry about that!!

[Balders]

Balders Prescreening Please

Hi could someone have a quick look at theses please.




Thanks in advance1234.5