Announcement

Collapse
No announcement yet.

Majky737 - Editing Advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Negative. I don't use filters at all. I have one photo accepted from that batch, so it is hard to find the reason of compression for me. I did nothing special or different when taking photos as well on editing. I will try to check other images made that day, maybe some of them will be better.
    Couldn't tell you for certain then. Usually that kind of compression is a result of a filter (especially NR) being applied. Maybe you didn't apply a specific filter, but there was NR done in camera or when converting from RAW?

    Leave a comment:


  • Majky737
    replied
    Originally posted by dlowwa View Post
    Sky is fairly compressed. Did you use any NR filters?
    Negative. I don't use filters at all. I have one photo accepted from that batch, so it is hard to find the reason of compression for me. I did nothing special or different when taking photos as well on editing. I will try to check other images made that day, maybe some of them will be better.

    Leave a comment:


  • dlowwa
    replied
    Sky is fairly compressed. Did you use any NR filters?

    Leave a comment:


  • Majky737
    replied
    Originally posted by dlowwa View Post
    Might be useful if we could actually see the two rejections in question.
    JetPhotos.com is the biggest database of aviation photographs with over 5 million screened photos online!


    JetPhotos.com is the biggest database of aviation photographs with over 5 million screened photos online!

    Leave a comment:


  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Hi,

    My last two rejects have reason "JPEG compression artifacts". Where is this compression on these images? Is there any way to fix them?
    Might be useful if we could actually see the two rejections in question.

    Leave a comment:


  • Majky737
    replied
    Hi,

    My last two rejects have reason "JPEG compression artifacts". Where is this compression on these images? Is there any way to fix them?

    Leave a comment:


  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Hello,

    I want to ask for prescreening of photo attached below.

    Thank you.
    Marian

    [ATTACH=CONFIG]25135[/ATTACH]
    Likely a color (too yellow), and possibly contrast as well, rejection.

    Leave a comment:


  • Majky737
    replied
    Hello,

    I want to ask for prescreening of photo attached below.

    Thank you.
    Marian

    Click image for larger version

Name:	EC-LRY_II.jpg
Views:	1
Size:	711.6 KB
ID:	1039783

    Leave a comment:


  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Thank you.

    I made one edit of different picture. Is it somehow better if you take sharpening and contrast in count?

    Kind regards
    Marian

    [ATTACH=CONFIG]24472[/ATTACH]
    Better. Would be acceptable for me.

    Leave a comment:


  • Majky737
    replied
    Originally posted by dlowwa View Post
    Both would still be soft (and probably contrast) rejections for me.
    Thank you.

    I made one edit of different picture. Is it somehow better if you take sharpening and contrast in count?

    Kind regards
    Marian

    Click image for larger version

Name:	N151W_III.jpg
Views:	1
Size:	691.9 KB
ID:	1035136

    Leave a comment:


  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Hello,

    I have received some rejects due Undersharpened/Soft. I have added some extra sharpening and looking for advice, if actual level of sharpeness is good enought or not. Photos are attached below.

    Thank you for feedback.

    Marian

    [ATTACH=CONFIG]24466[/ATTACH]


    [ATTACH=CONFIG]24467[/ATTACH]
    Both would still be soft (and probably contrast) rejections for me.

    Leave a comment:


  • Majky737
    replied
    Sharpening level

    Hello,

    I have received some rejects due Undersharpened/Soft. I have added some extra sharpening and looking for advice, if actual level of sharpeness is good enought or not. Photos are attached below.

    Thank you for feedback.

    Marian

    Click image for larger version

Name:	OK-BSC_II.jpg
Views:	1
Size:	640.8 KB
ID:	1035131


    Click image for larger version

Name:	N151W_II.jpg
Views:	1
Size:	774.6 KB
ID:	1035132

    Leave a comment:


  • dlowwa
    replied
    Originally posted by Majky737 View Post
    Thank you. I made one more edit, will be happy if you can comment it:

    [ATTACH=CONFIG]22671[/ATTACH]
    Borderline at best. Still soft in some areas, but starting to get oversharpened in others.

    Leave a comment:


  • Majky737
    replied
    Originally posted by dlowwa View Post
    Still quite soft. Contrast would be borderline for me.
    Thank you. I made one more edit, will be happy if you can comment it:

    Click image for larger version

Name:	EC-MKO_III.jpg
Views:	1
Size:	676.7 KB
ID:	1033673

    Leave a comment:


  • CFebra
    replied
    It seems better

    Leave a comment:

Working...
X