DirtyCrow - editing Advice

[dlowwa]

https://www.jetphotos.com/viewqueued_b.php?id=6539353

Can someone have a look on this one please?
I checked in LR the verticals of the bulding in the left background, the vertical edges of the white signs in the middle background and the vertical edges of the building in the right background. All look level to me.

Verticals leaning left = needs CW rotation.

[wkd001]

https://www.jetphotos.com/viewqueued_b.php?id=6539353

Can someone have a look on this one please?
I checked in LR the verticals of the bulding in the left background, the vertical edges of the white signs in the middle background and the vertical edges of the building in the right background. All look level to me.

HI

, not a screener, but It seems it needs al small touch of CW as the photo seems to be leaning to the left.

But the screener could have another idea.

Best regards,

Wilko

[DirtyCrow]

https://www.jetphotos.com/viewqueued_b.php?id=6539353

Can someone have a look on this one please?
I checked in LR the verticals of the bulding in the left background, the vertical edges of the white signs in the middle background and the vertical edges of the building in the right background. All look level to me.

[dlowwa]

Ok, i will try to edit it out, thanks

Don't think you can 'edit it out'; better to simply avoid it in the first place.

[DirtyCrow]

Ok, i will try to edit it out, thanks

[dlowwa]

I have received an rejection for bad proceessing again. This time i can not see any halos or anything like that.
The only thing i did, was to increase the saturation by 5 and set the color temperature from 5300 to 5600.

https://www.jetphotos.com/viewqueued_b.php?id=6523918

Dark editing halo indeed visible along the top of the fuselage.

[DirtyCrow]

I have received an rejection for bad proceessing again. This time i can not see any halos or anything like that.
The only thing i did, was to increase the saturation by 5 and set the color temperature from 5300 to 5600.

https://www.jetphotos.com/viewqueued_b.php?id=6523918

[dlowwa]

Do you think this one can make it?
[ATTACH=CONFIG]15213[/ATTACH]

Or better this one in sunshine, but with less resolution?
[ATTACH=CONFIG]15214[/ATTACH]

Thank you.

First would be a contrast rejection; second has some light halos visible, but might be acceptable.

[DirtyCrow]

Do you think this one can make it?


Or better this one in sunshine, but with less resolution?


Thank you.

[DirtyCrow]

This is possible, thank you.

[Julian S.]

I need advice on this one

https://www.jetphotos.com/viewqueued_b.php?id=6510030

Unfortunaly the screener wrote nothing in the mail, so i do not know, what is exactly wrong.
I didnt do anything special, no play with saturation, weird filters or anything like that.

Hi,

there are editing Halos all around the Plane. Those appear, if you use the "shadow/tiefen" and "highlight/lichter" tool and/or the clarity. So if you have used those, leave the regulators at "0" and the problem should be solved .

Hope this helps, have a nice evening!

[DirtyCrow]

I need advice on this one

https://www.jetphotos.com/viewqueued_b.php?id=6510030

Unfortunaly the screener wrote nothing in the mail, so i do not know, what is exactly wrong.
I didnt do anything special, no play with saturation, weird filters or anything like that.

[DirtyCrow]

Ok, thank you.

[dlowwa]

Centered the Canada and darkened the Singapore a bit. Better now?

[ATTACH=CONFIG]15149[/ATTACH]
[ATTACH=CONFIG]15150[/ATTACH]

AC looks fine, but the SQ is borderline for oversharpening/heat haze. You might want to try that one at a smaller size than 1900pix.

[DirtyCrow]

Centered the Canada and darkened the Singapore a bit. Better now?