Riadh - editing advice

[Riadh]

You can of course upload anything you want. This, however, would certainly be rejected, so your call if you want to wait ~ 9 days to find that out.

Will follow your judgment, worth the try on the forum, thanks

[dlowwa]

Hi, can I upload this picture (engine + engine gear)? (if OK of course), thank you[ATTACH=CONFIG]17121[/ATTACH]

You can of course upload anything you want. This, however, would certainly be rejected, so your call if you want to wait ~ 9 days to find that out.

[Riadh]

Hi, can I upload this picture (engine + engine gear)? (if OK of course), thank you

[dlowwa]

Is it better now? thank you
[ATTACH=CONFIG]16939[/ATTACH][ATTACH=CONFIG]16940[/ATTACH]

Better, but almost a little too much correction. Both seem a bit brighter as well.

[Riadh]

1. color (greenish cast)
2. better, but slight magenta cast
3. ok for me

Is it better now? thank you

[dlowwa]

And how about now?[ATTACH=CONFIG]16933[/ATTACH][ATTACH=CONFIG]16931[/ATTACH][ATTACH=CONFIG]16932[/ATTACH]

1. color (greenish cast)
2. better, but slight magenta cast
3. ok for me

[Riadh]

1. ok
2. color, borderline overexposed/soft
3. color
4. borderline overexposed

And how about now?

[dlowwa]

Hi, can you please pre screen these? thank you
[ATTACH=CONFIG]16913[/ATTACH][ATTACH=CONFIG]16914[/ATTACH][ATTACH=CONFIG]16915[/ATTACH][ATTACH=CONFIG]16916[/ATTACH]

1. ok
2. color, borderline overexposed/soft
3. color
4. borderline overexposed

[Riadh]

Hi, can you please pre screen these? thank you

[dlowwa]

how about now? any suggestion is very welcome, thank you
[ATTACH=CONFIG]16845[/ATTACH]

Still borderline overexposed/harsh contrast.

Final try, thanks [ATTACH=CONFIG]16846[/ATTACH]
this one was borderline soft too, is it better now? thanks [ATTACH=CONFIG]16847[/ATTACH]
last private, thanks a lot [ATTACH=CONFIG]16848[/ATTACH]

1. borderline soft
2. ok
3. borderline contrast

[Riadh]

Quite soft.

Final try, thanks
this one was borderline soft too, is it better now? thanks
last private, thanks a lot

[Riadh]

i would reject it for contrast

how about now? any suggestion is very welcome, thank you

[pdeboer]

try # 2 [ATTACH=CONFIG]16837[/ATTACH]

i would reject it for contrast

[Riadh]

Thanks i usually dont exceed 70% at 1 when sharpening to avoid over sharpness....never gone further but never tried at 0.2

try # 2

[Riadh]

Hi,

IMHO the image still soft. I've applied 120% and 0,2 radius in your image and got better results. Also you can use the PS sharpen tool to apply some sharpness in specific areas

Just my point of view, but wait more comments from the crew.

Cheers,

Vinicius

Thanks i usually dont exceed 70% at 1 when sharpening to avoid over sharpness....never gone further but never tried at 0.2