Adrian Tong - Editing Advice

[Adrian Tong]

Okay. Many Thanks.

[dlowwa]

Hi everyone,

Recently uploaded a photo but I mistakenly input the wrong airport. It should be taken at RJBB instead of VHHH. Then i tried to used to "Correct Info" function however it didnt not worked properly. May I kindly ask someone who can correct the location for me? Thank you in advance and sorry for the inconvenience.

Link for the photo:
https://www.jetphotos.com/photo/9048657

Just be patient. If you've submitted an info correction, it may take a little time before an editor can take a look and approve it.

[Adrian Tong]

Wrong Location

Hi everyone,

Recently uploaded a photo but I mistakenly input the wrong airport. It should be taken at RJBB instead of VHHH. Then i tried to used to "Correct Info" function however it didnt not worked properly. May I kindly ask someone who can correct the location for me? Thank you in advance and sorry for the inconvenience.

Link for the photo:

https://www.jetphotos.com/photo/9048657

[Adrian Tong]

Pre-screening advice

Hello again, would you mind giving comments on the following photos please? Thank you.

[Adrian Tong]

Im sorry for my action before, but that was the newer version, where contrasts and sharpness improvements took place. However, after looking at your comments, I've already deleted that photo from the queue.

[dlowwa]

Two more questions, should I add special scheme to No.1 since it has a special sticker? And also can I not include the tow truck in the photo in order to avoid rejection of cut off? Thanks.

I see you've already put the image of 4X-EDC in the queue, even after being advised it had multiple quality issues. In that case, you will have to see if anyone else is willing to give you advice, as I'm not willing to waste any more time on someone who's not going to bother following the advice he is given.

[Adrian Tong]

Two more questions, should I add special scheme to No.1 since it has a special sticker? And also can I not include the tow truck in the photo in order to avoid rejection of cut off? Thanks.

[dlowwa]

Hi again, may i have some comments for the following photos please?[ATTACH=CONFIG]17429[/ATTACH][ATTACH=CONFIG]17430[/ATTACH][ATTACH=CONFIG]17431[/ATTACH][ATTACH=CONFIG]17432[/ATTACH][ATTACH=CONFIG]17433[/ATTACH]

1. heat haze, contrast, oversharpened
2. soft, cut off
3. contrast, dirty
4. ok
5. contrast, heat haze, borderline overprocessed

[olandes269]

Hi again, may i have some comments for the following photos please?[ATTACH=CONFIG]17429[/ATTACH][ATTACH=CONFIG]17430[/ATTACH][ATTACH=CONFIG]17431[/ATTACH][ATTACH=CONFIG]17432[/ATTACH][ATTACH=CONFIG]17433[/ATTACH]

Hello Adrian,

I'm not screener and for me:

1 maybe heat distorsion

2 the elevator is off, can you put it in whole if not ok

3 low contrast, normal, grey sky

4 ok

5 contrast

regards

Olivier

[Adrian Tong]

Pre-screening advice

Hi again, may i have some comments for the following photos please?

[dlowwa]

May I know how can i change the color of No.5 since im not reallly familiar with hue, saturations. Thanks again!

The color is really washed out. This is more due to the poor light/contrast than anything else.

[Adrian Tong]

May I know how can i change the color of No.5 since im not reallly familiar with hue, saturations. Thanks again!

[dlowwa]

Hi, may i have some comments on these photos, thanks![ATTACH=CONFIG]17408[/ATTACH][ATTACH=CONFIG]17409[/ATTACH][ATTACH=CONFIG]17410[/ATTACH][ATTACH=CONFIG]17411[/ATTACH][ATTACH=CONFIG]17412[/ATTACH]

1. heat haze, contrast
2. contrast
3. ok
4. borderline contrast/soft
5. contrast, color

[Adrian Tong]

Pre-screening advice

Hi, may i have some comments on these photos, thanks!

[PrestonFiedler]

Imo there is some oversharpening as well, especially number 1, and number 4, both have jaggies.