Announcement

Collapse
No announcement yet.

B7478 - editing advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • B7478 - editing advice

    Hello, this is my first message in the forum.

    When I upload a photo, then I look at the page where the "Histogram" and "RGB Histogram" appear.In both tables I have seen that there is a horizontal line and my question is: Does it mean a cap that can not be exceeded?

    Thanks..
    Last edited by B7478; 2018-01-23, 06:22.

  • #2
    Hi there,
    I’m afraid I don’t quite understand what you mean. The tall spike on the right hand side of the graph of the Histogram is showing the brightness of the overexposed fin. Try darkening the midtones a little.
    If it 'ain't broken........ Don't try to mend it !

    Comment


    • #3
      I mean the horizontal line of red color. Does it mean a cap that can not be exceeded?

      https://www.jetphotos.com/members/sh...1515927262.jpg

      Comment


      • #4
        Hello,

        The red horizontal line is not actually related with your overexposed rejection. Your histogram looks ok and the photo desires an appeal in my opinion. If there is any doubt, you may check these links below that are accepted to database.

        https://www.jetphotos.com/photo/8827917
        https://www.jetphotos.com/photo/8827918

        Comment


        • #5
          Thanks Erenerol.

          Comment


          • #6
            Help with rejection

            Can someone help me about this rejection, in regards to "Over processed / Bad postprocessing". The histogram I see it right and I do not understand the reason for this statement.
            https://www.jetphotos.com/viewqueued_b.php?id=6595545

            Thanks for your help.

            Comment


            • #7
              Originally posted by B7478 View Post
              Can someone help me about this rejection, in regards to "Over processed / Bad postprocessing". The histogram I see it right and I do not understand the reason for this statement.
              https://www.jetphotos.com/viewqueued_b.php?id=6595545

              Thanks for your help.
              There are are some dark areas and banding visible above the fuselage that is not visible anywhere else in the frame. I'd guess that is what the overprocessed rejection was for.

              Comment


              • #8
                Thanks for the reply.

                Comment


                • #9
                  Help on helicopters edition.

                  Hello,
                  When I see the photos of helicopters, some have the blades cut and others lengthen the cut so that the whole shovel enters the image. Can you tell me what is the correct way to do it so that it is not rejected, or do the two options serve?
                  Thanks for the help.

                  Comment


                  • #10
                    Originally posted by B7478 View Post
                    Hello,
                    When I see the photos of helicopters, some have the blades cut and others lengthen the cut so that the whole shovel enters the image. Can you tell me what is the correct way to do it so that it is not rejected, or do the two options serve?
                    Thanks for the help.
                    Both are acceptable, just try to avoid the 'in-between' of cropped, but not close enough.

                    Comment


                    • #11
                      Thanks for the reply.
                      Greetings.

                      Comment


                      • #12
                        I do not understand this rejection

                        Hello,
                        I have received the rejection of this photo and I do not understand the reasons. The aircraft is centered according to the fuselage, as I have read that it must be done in the JetPhotos standards, and as I have been doing so far without any problem. Any help in this regard?
                        https://www.jetphotos.com/viewqueued_b.php?id=6727502

                        Thank you.

                        Comment


                        • #13
                          Originally posted by B7478 View Post
                          Hello,
                          I have received the rejection of this photo and I do not understand the reasons. The aircraft is centered according to the fuselage, as I have read that it must be done in the JetPhotos standards, and as I have been doing so far without any problem. Any help in this regard?
                          https://www.jetphotos.com/viewqueued_b.php?id=6727502

                          Thank you.
                          The a/c needs to be lower in frame. As this plane has only the sky in the background, the best way to center the a/c is like the example below (but of course with the correct size from the sides). The space between the wings, nose and tail needs to be equal.



                          Cheers,

                          Vinicius

                          Comment


                          • #14
                            Originally posted by B7478 View Post
                            Hello,
                            I have received the rejection of this photo and I do not understand the reasons. The aircraft is centered according to the fuselage, as I have read that it must be done in the JetPhotos standards, and as I have been doing so far without any problem. Any help in this regard?
                            https://www.jetphotos.com/viewqueued_b.php?id=6727502

                            Thank you.
                            There are no Jetphotos standards for centering a photo. There are photos looking balanced and photos looking unbalanced. Without any other background than blue sky, there is not much you can do to create an interesting framing. As mentioned above, the aircraft is too high. The photo looks unbalanced.
                            My photos on Flickr www.flickr.com/photos/geridominguez

                            Comment


                            • #15
                              Originally posted by vcruvinel View Post
                              The a/c needs to be lower in frame. As this plane has only the sky in the background, the best way to center the a/c is like the example below (but of course with the correct size from the sides). The space between the wings, nose and tail needs to be equal.

                              [ATTACH=CONFIG]17745[/ATTACH]

                              Cheers,

                              Vinicius
                              I'd never crop a photo the way you've just suggested. It might need to be moved a bit down , but certainly not this much, imho.

                              Comment

                              Working...
                              X