Announcement

Collapse
No announcement yet.

Editing Advice - Arnold Aaron

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ajaaron
    replied
    Ok - In general how do I go about removing halos? - I can't seem to notice them - how do I detect them, as you do?

    Looking at this photo below, there's no dust spots, but are there halos in this photo?

    Thank you for your patience!


    Click image for larger version

Name:	IMG_5360 @1280.JPG
Views:	1
Size:	644.0 KB
ID:	1031194

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    How about these photos?

    Emirates - I hope centred nicely, with contrast and colours just right. I have sharpened, but not too much as to induce jaggies.

    [ATTACH=CONFIG]19601[/ATTACH]

    & this BA 777,

    [ATTACH=CONFIG]19602[/ATTACH]

    AA 777

    [ATTACH=CONFIG]19603[/ATTACH]

    Thank you.
    Same issues as before: overprocessing and dirty. A fair amount of noise visible on these as well.

    Leave a comment:


  • ajaaron
    replied
    How about these photos?

    Emirates - I hope centred nicely, with contrast and colours just right. I have sharpened, but not too much as to induce jaggies.

    Click image for larger version

Name:	IMG_0489 @1280.JPG
Views:	1
Size:	637.2 KB
ID:	1031147

    & this BA 777,

    Click image for larger version

Name:	IMG_0429 @1280.JPG
Views:	1
Size:	777.8 KB
ID:	1031148

    AA 777

    Click image for larger version

Name:	IMG_0530 @1280.JPG
Views:	1
Size:	660.6 KB
ID:	1031149

    Thank you.

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    Cleaned the dust spot, centred, and I believe halos reduced....

    Good to go?

    Thank you for all your advice.

    [ATTACH=CONFIG]19567[/ATTACH]
    Same issues remain, poor centering and very obvious halos. There's also another dust spot below the aircraft I didn't notice before.

    Leave a comment:


  • ajaaron
    replied
    Cleaned the dust spot, centred, and I believe halos reduced....

    Good to go?

    Thank you for all your advice.

    Click image for larger version

Name:	IMG_9054.JPG
Views:	2
Size:	391.4 KB
ID:	1031120
    Attached Files

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    Ok, please could you advise precisely how I can tine down the overprocessing..is it the saturation?
    Please see:

    Originally posted by dlowwa View Post
    Editing halos
    Originally posted by dlowwa View Post
    ...and pretty strong halos still visible.
    Originally posted by dlowwa View Post
    There are editing halos.
    Originally posted by ajaaron View Post
    Also is picture too high in frame?
    No, too low.

    Originally posted by ajaaron View Post
    Where are the dust spots?
    Click image for larger version

Name:	IMG_9054.JPG
Views:	1
Size:	484.3 KB
ID:	1031102

    Originally posted by ajaaron View Post
    The picture is improvable with these adjustments, right?
    Yes.

    Leave a comment:


  • ajaaron
    replied
    Ok, please could you advise precisely how I can tine down the overprocessing..is it the saturation?

    Also is picture too high in frame? Where are the dust spots?

    The picture is improvable with these adjustments, right?

    Thank you
    Arnold.

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    Would this be up to standard for the database?

    I hope the contrast is right, as well as the framing...

    [ATTACH=CONFIG]19530[/ATTACH]
    Would be rejected for centering, overprocessed, and dirty.

    Leave a comment:


  • ajaaron
    replied
    Would this be up to standard for the database?

    I hope the contrast is right, as well as the framing...

    Click image for larger version

Name:	IMG_9054.JPG
Views:	2
Size:	391.4 KB
ID:	1031119
    Attached Files

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    Can this be improved and brought up to standard?

    Im tempted to sharpen it more, but than don't want to induce jagged edges...the colour i can bring diwn a little if its too saturated.

    Please advise, thank you.
    There are editing halos. Color is fine. Sharpening should be fixable.

    Leave a comment:


  • ajaaron
    replied
    Can this be improved and brought up to standard?

    Im tempted to sharpen it more, but than don't want to induce jagged edges...the colour i can bring diwn a little if its too saturated.

    Please advise, thank you.

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    ok - thank you - how about this one...

    [ATTACH=CONFIG]19256[/ATTACH]
    Would be rejected for soft and overprocessed.

    Leave a comment:


  • ajaaron
    replied
    ok - thank you - how about this one...

    Click image for larger version

Name:	IMG_8494.JPG
Views:	1
Size:	595.2 KB
ID:	1030845

    Leave a comment:


  • dlowwa
    replied
    Originally posted by ajaaron View Post
    okey dokey...

    Here it is with the suggested improvements...

    [ATTACH=CONFIG]19250[/ATTACH]
    Lots of dust spots and pretty strong halos still visible.

    Leave a comment:


  • ajaaron
    replied
    okey dokey...

    Here it is with the suggested improvements...

    Click image for larger version

Name:	IMG_8344 II.JPG
Views:	1
Size:	574.6 KB
ID:	1030839

    Leave a comment:

Working...
X