Announcement
Collapse
No announcement yet.
Help with Editing/Rejection
Collapse
X
-
Originally posted by joaojlle View PostHello all, I would like to know if any of those pictures are acceptable or need any correction:
[ATTACH=CONFIG]22154[/ATTACH] [ATTACH=CONFIG]22155[/ATTACH] [ATTACH=CONFIG]22156[/ATTACH][ATTACH=CONFIG]22157[/ATTACH]
The aircrafts: Robinson R44 reg PP-PRL; Embraer Phenom 100 reg PP-EMB; Cirrus SR22 reg PP-SUL; Cherokee 140 reg PT-IYQ
Any help will be very useful!
2. borderline contrast
3. contrast
4. ok
Leave a comment:
-
-
Hi,
1) Because the tail is over sharpened while the rest of the airframe is clearly too soft. Can be caused by the lense, the editing...
3) You selected civilian genre (should be military) while you uploaded it with its military reg (which is correct)
4) Recognisable people in frame, try to avoid it as much as possible
Please carefully read this, it's full of useful infos : https://forums.jetphotos.com/showthr...ES-New-version
Regards
Alex
Leave a comment:
-
Question about a rejection
Hello everyone! Recently I got a photo rejected, and the photo is this one: https://www.jetphotos.com/viewqueued_b.php?id=7117323
My question is about the reasons:
1- How can a photo be at the same time Oversharpen and Undersharpened? This really cracked my mind
2- Contrast reason I got, nothing to say about this.
3- Why Bad Info? The aircraft info was filled correctly, the register XX757 is clearly visible (at least in my point of view, sorry if I forgot something, and if I had forgotten something, please say) and this aircraft really is in Bacacheri now, as Helisul's owner bought this aircraft and is now doing a maintenance on it, waiting to take it to his private farm.
4- I don't get the point of Bad Motive, I filled a cattegory box wrong?
Those are my questions about it, Sorry if I made any mistake.
Leave a comment:
-
And the photo was accepted. Thank you very much for all the help!!!
Photo link: https://www.jetphotos.com/photo/9197687
Leave a comment:
-
-
Originally posted by joaojlle View Post[ATTACH=CONFIG]21098[/ATTACH][ATTACH=CONFIG]21099[/ATTACH][ATTACH=CONFIG]21100[/ATTACH][ATTACH=CONFIG]21101[/ATTACH]
Here are the printscreens of my corrections, with Lightroom. The lines over both sides of the water tank, the light pole (that isnt all the way vertical) and the Shell banner. Is it fine now?
Leave a comment:
-
Leave a comment: