Announcement

Collapse
No announcement yet.

Help with rejection - Digital manipulation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with rejection - Digital manipulation

    Hello to everyone,
    I had a rejected photo because of "digital manipulation".
    The message by email said that:

    Screener's Comments: Cloning on the platform. Please be warned this could lead to measures such a queue reducal or ban if repeated.


    I compared the RAW file with the edited one and I didnt see any cloning on the apron so far. Could you tell me where the suspected cloned zone is? In order to help me to analyze the issue.

    Photo:
    https://www.jetphotos.com/viewreject_b.php?id=7179194

    Thank you in advanced.

    Regards

    Christian

  • #2


    The ramp looks quite strange there.
    “The only time you have too much fuel is when you’re on fire.”

    Erwin

    Comment


    • #3
      Originally posted by ErwinS View Post


      The ramp looks quite strange there.
      Thanks for the feedback Erwin, I need if its possible, a 2nd opinion about this rejection. Honestly, I dont see nothing suspicious on that zone.
      In about 10hs I will be arriving home, I could attach a screen of the raw file in order to keep analyzing this.

      Regards

      Comment


      • #4
        Originally posted by cmandel View Post
        Hello to everyone,
        I had a rejected photo because of "digital manipulation".
        The message by email said that:

        Screener's Comments: Cloning on the platform. Please be warned this could lead to measures such a queue reducal or ban if repeated.


        I compared the RAW file with the edited one and I didnt see any cloning on the apron so far. Could you tell me where the suspected cloned zone is? In order to help me to analyze the issue.

        Photo:
        https://www.jetphotos.com/viewreject_b.php?id=7179194

        Thank you in advanced.

        Regards

        Christian
        Should be easy to resolve. Contact me privately to send the RAW file and I will take a look. If the rejection was a mistake, I will remedy it.

        Comment


        • #5
          Originally posted by dlowwa View Post
          Should be easy to resolve. Contact me privately to send the RAW file and I will take a look. If the rejection was a mistake, I will remedy it.
          Thanks, tonight (-3 UTC) I will send the raw file.

          Comment


          • #6
            Raw file sent.

            Thanks, Regards

            Comment


            • #7
              Originally posted by cmandel View Post
              Raw file sent.

              Thanks, Regards
              Thank you. I've taken a look and can confirm it was wrongly rejected and have thus added it. Thanks for your patience and understanding.

              Comment


              • #8
                Thank you all, thank you dlowwa for the assistance.

                Regards

                Comment


                • #9
                  Hallo JP crew

                  I had a rejected photo for Dirty Scan / CMOS Dust spots and "digital manipulation". For the dust spot I agree but can not see the digital manipulated part.
                  Pls advice

                  NitoClick image for larger version

Name:	N894DN-Delta-TNCA-Nava-010319-AAA_1241.jpg
Views:	1
Size:	343.6 KB
ID:	1034451

                  Better be in stone age than in no age

                  Comment


                  • #10
                    Originally posted by Nito View Post
                    Hallo JP crew

                    I had a rejected photo for Dirty Scan / CMOS Dust spots and "digital manipulation". For the dust spot I agree but can not see the digital manipulated part.
                    Pls advice

                    Nito[ATTACH=CONFIG]23665[/ATTACH]
                    Disregard the Digital manipulation part. Just clone out the dust spot and it should be good to go.
                    My photos on Flickr www.flickr.com/photos/geridominguez

                    Comment

                    Working...
                    X