If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thank you. I do understand what you are saying, however when I move the fuselage upwards by just a bit it no longer sits perfectly centred using your online “centre” tool. Is that tool just to be used as a general guideline?
Please allow me to use your photo for demonstration purpose. I have used the Jetphotos tool to check centering and then deleted it right away.
I don't think the aircraft sits fit in the centering tool.
The fuselage should be well positioned in accordance with the center line. As Brain said, it's too low in the frame.
It’s too low in the frame. The distance from the top of the fuselage above the cockpit to the top of the frame should be the same as the distance from the lowest point of the lower fuselage, i.e. the curve behind the main gear, to the bottom of the frame.
Thank you. I do understand what you are saying, however when I move the fuselage upwards by just a bit it no longer sits perfectly centred using your online “centre” tool. Is that tool just to be used as a general guideline?
It’s too low in the frame. The distance from the top of the fuselage above the cockpit to the top of the frame should be the same as the distance from the lowest point of the lower fuselage, i.e. the curve behind the main gear, to the bottom of the frame.
I had a photo that was rejected because the aircraft was not centered; however, I used JetPhoto's online tool to make sure it was centered. Please take a look at the attached photo and let me know how I can fix it so I can re-submit the photo.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Leave a comment: