Pre-screening Help

[bgkicks49]

Here are the fixes for the ones without heat haze. Please let me know if I was able to fix the contrast issue in the first photo, the compression/sharpness in the 2nd photo and the contrast and exposure in the 3rd photo. Thank you!

[pdeboer]

Here are the fixes for the ones without heat haze. Please let me know if I was able to fix the contrast issue in the first photo, the compression/sharpness in the 2nd photo and the contrast and exposure in the 3rd photo. Thank you!

They all look a tad dark to me, all borderline but acceptable to me.

[bgkicks49]

Thank you. Will make sure to slightly increase exposure to make them less borderline.



I have 2 possible first registrations and would like your feedback on them, If I missed anything, please let me know of any other issues that you see.

1) Please check contrast and exposure. Also please let me know if it needs any rotation (adjusted horizon based off cone in background)



2) Would this be considered backlit, even if 90% of the aircraft is being hit by sunlight?



Thank you

[dlowwa]

Thank you. Will make sure to slightly increase exposure to make them less borderline.



I have 2 possible first registrations and would like your feedback on them, If I missed anything, please let me know of any other issues that you see.

1) Please check contrast and exposure. Also please let me know if it needs any rotation (adjusted horizon based off cone in background)



2) Would this be considered backlit, even if 90% of the aircraft is being hit by sunlight?



Thank you

Borderline sharpening/compression (especially first) but would be ok for me.

[bgkicks49]

Please take a look at these photos. Let me know if contrast and exposure is sufficient. Would also like to know if any vignetting is visible (Attempted to crop to remove it)

Thank you

[LX-A343]

Please take a look at these photos. Let me know if contrast and exposure is sufficient. Would also like to know if any vignetting is visible (Attempted to crop to remove it)

Thank you

1, 2: unlevel
3: OK

[bgkicks49]

Thank you for helping with these photos. I believe I have fixed the horizon issues in these photos. Thank you again and happy holidays

[pdeboer]

Thank you for helping with these photos. I believe I have fixed the horizon issues in these photos. Thank you again and happy holidays

Level is OK now.
I would accept them, but the cut is very tight on the side of the nose. I personally would like to see some more in front of the nose. My advice would be to give it the same amount of space there is on the right side ( between the apu outlet and the right edge)

[bgkicks49]

Hello, I am looking to have these 4 photos pre-screened for any issues that you may see with these photos. Thank you in advance

[LX-A343]

Hello, I am looking to have these 4 photos pre-screened for any issues that you may see with these photos. Thank you in advance

They all look OK here.

[bgkicks49]

Would this photo be acceptable? Is the light pole too distracting? Does this photo have any contrast or sharpness issues due to some slight heat haze?

[dlowwa]

Would this photo be acceptable? Is the light pole too distracting? Does this photo have any contrast or sharpness issues due to some slight heat haze?

Aircraft is soft/blurry/heat hazed. Not sure it is fixable.

[bgkicks49]

Would these photos be acceptable? Please let me know if any specific issues that you see. Thank you

[dlowwa]

Would these photos be acceptable?

No. Severe softness/blur, and noise/compression. Not fixable.

[bgkicks49]

Please take a look at these photos. 1st photo was taken under overcast days with a little bit of sun peeking out (as seen on wheel area)

1) Please let me know if contrast/exposure is an issue. Would you suggest a possible re-edit for entry into JP?



2) Is photo horizon level, any contrast issues, also is there any issues with softness/sharpness (photo taken at higher focal length)



3) Any issues with contrast and any issues with sharpness/softness (photo also taken at higher than normal focal length)



If you see any other issues that I may have missed, please let me know. Thank you in advance!