Alber Rs - Editing Advice

[dlowwa]

Opinion Please

Borderline soft. Not blurry.

[Stanley JH]

Not screener but looks blurry/soft

[Alber Rs]

Opinion Please

[dlowwa]

Opinion Please

Soft/poor light, please don't upload.

[Alber Rs]

Opinion Please

[dlowwa]

Opinion please .Thanks

1. soft, might need a bit of CW
2. contrast, overprocessed

[Alber Rs]

Opinion please .Thanks

[Alber Rs]

Hi, I get an error when uploading photos to get opinions on this post
Thanks

[dlowwa]

Ok, so if the wing clipping had been a little more to the right would it be valid?
And the photo of the tower if the plane is lower and the antennas are not clipped would it be valid?

Possibly, but can't speculate beyond that without seeing anything.

[Alber Rs]

1. awkward crop of wing
2. too low in the frame. you've cut part of the tower, so your reasoning for the centering doesn't work.

Ok, so if the wing clipping had been a little more to the right would it be valid?
And the photo of the tower if the plane is lower and the antennas are not clipped would it be valid?
What would be the category of the photo?
Thank you very much.

[dlowwa]

Hi, I have questions about the rejections of these photos and I would like to improve for the future.
Among the rejections is a bad cut. What would be the ideal cut?

And it is among rejects, plane not centered, in this composition I wanted to show the airport control tower that is why I placed the plane a little lower.

1. awkward crop of wing
2. too low in the frame. you've cut part of the tower, so your reasoning for the centering doesn't work.

[Alber Rs]

Hi, I have questions about the rejections of these photos and I would like to improve for the future.
Among the rejections is a bad cut. What would be the ideal cut?

https://www.jetphotos.com/viewqueued_b.php?id=12208527

And it is among rejects, plane not centered, in this composition I wanted to show the airport control tower that is why I placed the plane a little lower.

https://www.jetphotos.com/viewqueued_b.php?id=12208499

Thank you very much for the comments

[Alber Rs]

It has been that way since 2018, but unfortunately the link to relevant guidelines is not currently working.

Ok Thanks for the comment

[dlowwa]

Ok. I didn't know that the procedure worked like that.

It has been that way since 2018, but unfortunately the link to relevant guidelines is not currently working.

[Alber Rs]

Ok. I didn't know that the procedure worked like that.