Announcement

Collapse
No announcement yet.

Airport codes in the United States.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LRJet Guy
    replied
    "K" is the letter used to designate Continental United States for four letter ICAO airport codes.

    Only airports that get 4 letter codes in the US are the airports currently equipped with an ILS, or planning one.

    The airport I learned to fly at recently got a 4 letter code from the 3 character code it had after the runway was extended and an ILS planned.

    Leave a comment:


  • screaming_emu
    replied
    if there is a number in the airport code it doesn't get a K....not entirely sure why.

    Leave a comment:


  • ptbodale
    replied
    Is your question about IATA codes (3 letters) or ICAO codes (4 letters)?

    Leave a comment:


  • ACman
    replied
    In Canada, most of the ICAO's start with C like CYYZ. CYVR, CYEG, on the other hand alot of the IATA's start with Y, like YHZ, YYZ. YUL.

    Leave a comment:


  • Van Hoolio
    replied
    And they are both in Fairbanks, very good.

    Leave a comment:


  • chrisburns
    replied
    PAEI is Fairbanks Air Force Base, PAFA is Fairbanks International Airport.

    Leave a comment:


  • Van Hoolio
    replied
    Originally posted by Alaska Air Rules
    Not all airports have the letter "K" at the beginning. Up here in Alaska, and Hawaii our airports start with "P", example: Anchorage=PANC.
    Some of the ICAO identifiers sort of make sense:

    PANC Anchorage
    PAEI Fairbanks
    PAJN Juneau

    "PA" I assume means "Pacific Alaska"

    PHNL Honolulu
    PHTO Hilo
    PHOG Maui

    PH, Pacific Hawaii


    EHAM Amsterdam
    EH, Europe Holland

    EGLL London Heathrow
    EG, Europe Great Britain

    Leave a comment:


  • DeltaRules
    replied
    Originally posted by JordanD
    I know that K is designated for the continental US. Usually on charts the small grass strips have identifiers like 23KY or something like that, but I don't see why something in Ohio would be I69.
    Some airports in Ohio have an OH** distinction. OH36 is Zanesville's Riverside Airport.

    DeltaRules

    Leave a comment:


  • indian airlines
    replied
    There are many airports that aren't K###. Princeton for example is 39N. I don't know why though, or what convention regulates this.

    Leave a comment:


  • JordanD
    replied
    I know that K is designated for the continental US. Usually on charts the small grass strips have identifiers like 23KY or something like that, but I don't see why something in Ohio would be I69.

    Leave a comment:


  • DeltaRules
    replied
    Does the "I" indicate anything? Along with Jordan's I69, two airports near DAY are I17 & I think I19. Parr Airport in Zanesville, OH is 42I, and all three of these have paved runways.

    A few airports on US soil in the Caribbean have "T" at the start of their code; SJU is TJSJ, STT is TIST, & STX is TISX.

    DeltaRules

    Leave a comment:


  • ASpilot2be
    replied
    Not all airports have the letter "K" at the beginning. Up here in Alaska, and Hawaii our airports start with "P", example: Anchorage=PANC.

    Leave a comment:


  • JordanD
    started a topic Airport codes in the United States.

    Airport codes in the United States.

    I've been curious about this for a while. How does the FAA decide whether or not an airport gets an identifier with a K at the beginning? I can't think of a reason. I thought maybe towered airports only but there's a lot of nontowered airports with a "K" identifier. Then I thought maybe airports with a paved runway, but recently I flew to I69 in Ohio, which has a paved runway. Does runway lenght have something to do with it?
Working...
X