and it is possible to learn what parameters you changed?
Announcement
Collapse
No announcement yet.
nik-pilgrim - rejection help/editing advice
Collapse
X
-
Originally posted by nik-pilgrim View Postand it is possible to learn what parameters you changed?
I have only increased the brightness of the whites by adjusting the levels.
Here are the settings i have done:
Blacks: Leave at "0"
Midtones: Leave at "1,00"
Whites: Changed to 214
Hope this helps.Best Regards from Germany,
Julian S.
Comment
-
Originally posted by nik-pilgrim View Post
Comment
-
frankly speaking, I don't understand a remark concerning a bad informatsmm. Board number (registration) is specified, plane type too... Of course it is possible to argue with too big free space - not to cut off the picture directly on a plane contour... I will wait that the administrator of a formum will answer (he requested the reference to the decision)
Comment
-
Originally posted by nik-pilgrim View Postfrankly speaking, I don't understand a remark concerning a bad informatsmm. Board number (registration) is specified, plane type too... Of course it is possible to argue with too big free space - not to cut off the picture directly on a plane contour... I will wait that the administrator of a formum will answer (he requested the reference to the decision)
Comment
-
Originally posted by nik-pilgrim View Postall one, I can't understand that Bad information is meant criterion?
Registration: RF-92438
and this:
Registration:RF-92438
The former will cause and error in the database, and was thus rejected.
Comment
-
Originally posted by nik-pilgrim View Postit would be desirable to hear opinion of community on these pictures before application for the publication
[ATTACH=CONFIG]14688[/ATTACH]
[ATTACH=CONFIG]14689[/ATTACH]
[ATTACH=CONFIG]14690[/ATTACH]
Best Regards,
Vinicius
Comment
-
Originally posted by nik-pilgrim View Postand how to be if shooting is carried out at sunset?
Even if the photo was taken at sunset, it does not mean it has to be dark. There is a gap in the right side from the histogram.
Better wait a comment from a screener...but hope this help.
Best Regards,
Vinicius
Comment
Comment