Announcement

Collapse
No announcement yet.

nik-pilgrim - rejection help/editing advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    and it is possible to learn what parameters you changed?

    Comment


    • #17
      Originally posted by nik-pilgrim View Post
      and it is possible to learn what parameters you changed?
      Sure!

      I have only increased the brightness of the whites by adjusting the levels.
      Here are the settings i have done:
      Click image for larger version

Name:	3.jpg
Views:	1
Size:	10.3 KB
ID:	1022927
      Blacks: Leave at "0"
      Midtones: Leave at "1,00"
      Whites: Changed to 214

      Hope this helps.
      Best Regards from Germany,
      Julian S.​

      Comment


      • #18
        thanks. I will try to remake and send anew

        Comment


        • #19
          I don't understand a cause of failure in the publication of a photo again:
          - Subject too far
          - Too much dead space
          - Bad Info
          Especially point of refusal - Bad information isn't clear the aunt that it is meant it?
          Click image for larger version

Name:	_H8A1463_rs.jpg
Views:	1
Size:	156.6 KB
ID:	1023025

          Comment


          • #20
            Can you please send us the link to that rejection ?

            Thank you

            Alex

            Comment


            • #21
              JetPhotos.com is the biggest database of aviation photographs with over 5 million screened photos online!

              Comment


              • #22
                there is a bit too much dead space around the aircraft. The screener left you a note regarding the bad info: you left a blank before the reg. This can cause problems with the db.
                My photos on Flickr www.flickr.com/photos/geridominguez

                Comment


                • #23
                  frankly speaking, I don't understand a remark concerning a bad informatsmm. Board number (registration) is specified, plane type too... Of course it is possible to argue with too big free space - not to cut off the picture directly on a plane contour... I will wait that the administrator of a formum will answer (he requested the reference to the decision)

                  Comment


                  • #24
                    Originally posted by nik-pilgrim View Post
                    frankly speaking, I don't understand a remark concerning a bad informatsmm. Board number (registration) is specified, plane type too... Of course it is possible to argue with too big free space - not to cut off the picture directly on a plane contour... I will wait that the administrator of a formum will answer (he requested the reference to the decision)
                    As you want, but I think I have a very good knowledge of what's happening behind the screening scenes, being myself about 15 years screener here and senior screener, since the senior screeners have been introduced here at JP more than 10 years ago
                    My photos on Flickr www.flickr.com/photos/geridominguez

                    Comment


                    • #25
                      all one, I can't understand that Bad information is meant criterion?

                      Comment


                      • #26
                        Originally posted by nik-pilgrim View Post
                        all one, I can't understand that Bad information is meant criterion?
                        Gerardo has already told you: there was a blank space entered before the serial. The difference between this:

                        Registration: RF-92438

                        and this:

                        Registration:RF-92438

                        The former will cause and error in the database, and was thus rejected.

                        Comment


                        • #27
                          it would be desirable to hear opinion of community on these pictures before application for the publication
                          Click image for larger version

Name:	_H8A1815_rs.jpg
Views:	1
Size:	679.2 KB
ID:	1023094
                          Click image for larger version

Name:	_H8A2038_rs.jpg
Views:	1
Size:	189.5 KB
ID:	1023095
                          Click image for larger version

Name:	_H8A2778_rs.jpg
Views:	1
Size:	637.9 KB
ID:	1023096

                          Comment


                          • #28
                            Originally posted by nik-pilgrim View Post
                            it would be desirable to hear opinion of community on these pictures before application for the publication
                            [ATTACH=CONFIG]14688[/ATTACH]
                            [ATTACH=CONFIG]14689[/ATTACH]
                            [ATTACH=CONFIG]14690[/ATTACH]
                            First one lacks contrast and it's a bit dark, also soft in the words in the plane body. The second is dark (see the right side of the histogram) and the third is dark (see the right side of the histogram), soft and needs CW rotation.

                            Best Regards,

                            Vinicius

                            Comment


                            • #29
                              and how to be if shooting is carried out at sunset?

                              Comment


                              • #30
                                Originally posted by nik-pilgrim View Post
                                and how to be if shooting is carried out at sunset?
                                Nik,

                                Even if the photo was taken at sunset, it does not mean it has to be dark. There is a gap in the right side from the histogram.

                                Click image for larger version

Name:	Screen1.jpg
Views:	1
Size:	16.1 KB
ID:	1023097

                                Better wait a comment from a screener...but hope this help.

                                Best Regards,

                                Vinicius

                                Comment

                                Working...
                                X