Announcement
Collapse
No announcement yet.
Pre-screening Advice
Collapse
X
-
Good Evening, another 3 for pre-screening please
When I look at an equalised version of this, there is a glow around the tail and upper fuselage which would suggest over processing. This is not something I ususally suffer from, and have done nothing different to normal. If this is the case, any suggestions? I barely touch the clarity and vibrance slider (+2 to each) and there is some lightroom sharpening and noise reduction in there (+54) but this is no more than I usually use without issue.
Thanks
Comment
-
Originally posted by DominicHall View PostGood Evening, another 3 for pre-screening please
[ATTACH=CONFIG]27507[/ATTACH]
[ATTACH=CONFIG]27508[/ATTACH] When I look at an equalised version of this, there is a glow around the tail and upper fuselage which would suggest over processing. This is not something I ususally suffer from, and have done nothing different to normal. If this is the case, any suggestions? I barely touch the clarity and vibrance slider (+2 to each) and there is some lightroom sharpening and noise reduction in there (+54) but this is no more than I usually use without issue.
[ATTACH=CONFIG]27509[/ATTACH]
Thanks
Comment
-
Originally posted by dlowwa View PostFirst a bit dark. Yes halos visible on second, either from in camera settings, or something in your workflow. Likely culprits for the latter are de-haze, clarity, vibrance, shadow/highlight, etc.. Last one would be ok for me.
Comment
-
Originally posted by DominicHall View PostThanks for the advice. I'll go back through my workflow and see if I can find the culprit. More frustrating than anything, as I've done nothing different to normal. I've lightned G-SUGR, hopefully is acceptable now
[ATTACH=CONFIG]27529[/ATTACH]
Comment
-
-
Originally posted by dlowwa View Post1. ok
2. borderline soft
3. ok
I've also just noticed that I have managed to get multiple images in the queue with an incorrect date on them (obviously I missed the date box). I cannot find any way in the correct info screen to sort this. Is this possible or do i need to delete and requeue?
Comment
-
Originally posted by DominicHall View PostThanks, have sharpened the easyJet slightly. hopefully no editing halo's there as is OK now
[ATTACH=CONFIG]27600[/ATTACH]
I've also just noticed that I have managed to get multiple images in the queue with an incorrect date on them (obviously I missed the date box). I cannot find any way in the correct info screen to sort this. Is this possible or do i need to delete and requeue?
Comment
-
Originally posted by DominicHall View PostApologies, I may have inadvertnatly crossed the 24hr rule. If that's the case then I'll re-submit the image tomorrow, but some advice on the date issue on my already submitted images would be much appreciated.
Easyjet oversharpened now.
Comment
-
Originally posted by dlowwa View PostThere is no way to adjust dates while images are in the queue, you'll need to remove them from the queue and re-submit with the correct dates.
Easyjet oversharpened now.
Heres another few for you to pre-screen please when you get a moment.
There appears to be an editing artefact halfway down the left hand wing. This appears in the GIMP only equalised version, not in photoshop.
I think this one may be soft towards the aft section and into the tail.
Comment
-
Originally posted by DominicHall View PostOk thanks, have re-submitted with correct date now. I'll abandon the easyJet then, maybe one day when my editing skills have improved I'll come back to it.
Heres another few for you to pre-screen please when you get a moment.
[ATTACH=CONFIG]27667[/ATTACH] There appears to be an editing artefact halfway down the left hand wing. This appears in the GIMP only equalised version, not in photoshop.
[ATTACH=CONFIG]27668[/ATTACH] I think this one may be soft towards the aft section and into the tail.
[ATTACH=CONFIG]27669[/ATTACH]
2. centering/crop, and yes bit soft towards the tail but may be acceptable
3. also bit soft
Comment
Comment