If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have seen some great shots from terminals before and was wondering how to properly expose them. Is it luck of the draw that they don't get the glare or is there a way to remove the glare in PS.
What I do to reduce/eliminate glare is I find where the glare is coming from, and then put my hand up to block the glare. I also get as close to the glass as possible and find the cleanest spot I can.
And as for exposing, I don't change anything as if I was shooting outside.
Just as an example, for night shots like these, I took my jacket (a light rain jacket that's dark) and situated it to block the lights from inside.
[photoid=6363180]
[photoid=6409688]
Reflections in the image when you shoot through the glass cannot be removed. They make for an unuseable image as far as JP is concerned.
You can, however, reduce the chance of them occurring.
-Find a clean area of glass.
-Get the lens as close as possible to the glass.
-If you have a hard lenshood you may be better off removing it.
-A rubber lenshood helps as you can get the rim right up against the glass. Watch out for vignetting though.
-When you hold the camera up to the glass throw a dark lined coat or dark coloured material over your head and shoulders to reduce or eliminate reflections.
-In processing, remember that there will probably be a colour cast from the glass which in my experience is normally blue. Use the white point and / or grey point dropper to set the colour balance.
.....and finally....
Be prepared for some VERY odd looks from fellow non-photographer passengers !!
If it 'ain't broken........ Don't try to mend it !
Yes I'd just like to back up Brian by saying make sure you look in post processing for the colour cast that always seems to come from windows. More than likely Blue or Gold. I've seen a few good photos go through the system and be rejected for the colour shift.
Of course if you know your camera you can manual white balance also.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment