Announcement

Collapse
No announcement yet.

Editing Advice - Arnold Aaron

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Editing Advice - Arnold Aaron

    Still new to this...but is this up to standard?

    Thank you.

    Click image for larger version

Name:	IMG_8344.JPG
Views:	1
Size:	704.6 KB
ID:	1045769

  • #2
    contrast is low and its soft, so you'll need to increase contrast and sharpening, just my 2 cents

    Comment


    • #3
      Originally posted by ajaaron View Post
      Still new to this...but is this up to standard?

      Thank you.

      [ATTACH=CONFIG]19240[/ATTACH]
      Image is much too soft for 1400 pix. Start at a lower resolution like 1024 or 1200 until you've figured things out a bit more. Editing halos and dust spots also visible.

      Comment


      • #4
        okey dokey...

        Here it is with the suggested improvements...

        Click image for larger version

Name:	IMG_8344 II.JPG
Views:	1
Size:	574.6 KB
ID:	1030839

        Comment


        • #5
          Originally posted by ajaaron View Post
          okey dokey...

          Here it is with the suggested improvements...

          [ATTACH=CONFIG]19250[/ATTACH]
          Lots of dust spots and pretty strong halos still visible.

          Comment


          • #6
            ok - thank you - how about this one...

            Click image for larger version

Name:	IMG_8494.JPG
Views:	1
Size:	595.2 KB
ID:	1030845

            Comment


            • #7
              Originally posted by ajaaron View Post
              ok - thank you - how about this one...

              [ATTACH=CONFIG]19256[/ATTACH]
              Would be rejected for soft and overprocessed.

              Comment


              • #8
                Can this be improved and brought up to standard?

                Im tempted to sharpen it more, but than don't want to induce jagged edges...the colour i can bring diwn a little if its too saturated.

                Please advise, thank you.

                Comment


                • #9
                  Originally posted by ajaaron View Post
                  Can this be improved and brought up to standard?

                  Im tempted to sharpen it more, but than don't want to induce jagged edges...the colour i can bring diwn a little if its too saturated.

                  Please advise, thank you.
                  There are editing halos. Color is fine. Sharpening should be fixable.

                  Comment


                  • #10
                    Would this be up to standard for the database?

                    I hope the contrast is right, as well as the framing...

                    Click image for larger version

Name:	IMG_9054.JPG
Views:	2
Size:	391.4 KB
ID:	1031119
                    Attached Files

                    Comment


                    • #11
                      Originally posted by ajaaron View Post
                      Would this be up to standard for the database?

                      I hope the contrast is right, as well as the framing...

                      [ATTACH=CONFIG]19530[/ATTACH]
                      Would be rejected for centering, overprocessed, and dirty.

                      Comment


                      • #12
                        Ok, please could you advise precisely how I can tine down the overprocessing..is it the saturation?

                        Also is picture too high in frame? Where are the dust spots?

                        The picture is improvable with these adjustments, right?

                        Thank you
                        Arnold.

                        Comment


                        • #13
                          Originally posted by ajaaron View Post
                          Ok, please could you advise precisely how I can tine down the overprocessing..is it the saturation?
                          Please see:

                          Originally posted by dlowwa View Post
                          Editing halos
                          Originally posted by dlowwa View Post
                          ...and pretty strong halos still visible.
                          Originally posted by dlowwa View Post
                          There are editing halos.
                          Originally posted by ajaaron View Post
                          Also is picture too high in frame?
                          No, too low.

                          Originally posted by ajaaron View Post
                          Where are the dust spots?
                          Click image for larger version

Name:	IMG_9054.JPG
Views:	1
Size:	484.3 KB
ID:	1031102

                          Originally posted by ajaaron View Post
                          The picture is improvable with these adjustments, right?
                          Yes.

                          Comment


                          • #14
                            Cleaned the dust spot, centred, and I believe halos reduced....

                            Good to go?

                            Thank you for all your advice.

                            Click image for larger version

Name:	IMG_9054.JPG
Views:	2
Size:	391.4 KB
ID:	1031120
                            Attached Files

                            Comment


                            • #15
                              Originally posted by ajaaron View Post
                              Cleaned the dust spot, centred, and I believe halos reduced....

                              Good to go?

                              Thank you for all your advice.

                              [ATTACH=CONFIG]19567[/ATTACH]
                              Same issues remain, poor centering and very obvious halos. There's also another dust spot below the aircraft I didn't notice before.

                              Comment

                              Working...
                              X