Hello,
Following a research on the Net and being an aviation enthusiast with a specific attraction for civil aviation, I discovered your friendly community to which I decided to register !! ... I would like to point out that being french speaker, my English might not be the most understandable, which is why I would ask you to be patient and understanding...
I've noticed that during a report on an Air France A380, just arrived from a flight it seems it assured on Los Angeles, therefore of a duration of 12h of flight, it was programmed 3h after his park for a new flight on New York!!.... This time of stop seemed rather short to me: personally, I play a simulation of airline management, and for my long-haul planes, I set a stopover of 50% of the duration of flight that they make, that is to say that if my A380 makes a 12-hour flight, I leave it parked at destination for 6 hours before its return flight time, this in my opinion to not keep the reactors operating on stresses too sustained, potentially increasing the risk of failure. I would like to know whether there are any technical constraints or other factors which determine the minimum duration of technical stop for different types of aircraft?
Thank you for your answers.
Following a research on the Net and being an aviation enthusiast with a specific attraction for civil aviation, I discovered your friendly community to which I decided to register !! ... I would like to point out that being french speaker, my English might not be the most understandable, which is why I would ask you to be patient and understanding...
I've noticed that during a report on an Air France A380, just arrived from a flight it seems it assured on Los Angeles, therefore of a duration of 12h of flight, it was programmed 3h after his park for a new flight on New York!!.... This time of stop seemed rather short to me: personally, I play a simulation of airline management, and for my long-haul planes, I set a stopover of 50% of the duration of flight that they make, that is to say that if my A380 makes a 12-hour flight, I leave it parked at destination for 6 hours before its return flight time, this in my opinion to not keep the reactors operating on stresses too sustained, potentially increasing the risk of failure. I would like to know whether there are any technical constraints or other factors which determine the minimum duration of technical stop for different types of aircraft?
Thank you for your answers.
Comment