Michał Furmańczak - editing advice

[A330-343X]

Ok. Thank You !

Corrected ones:
[ATTACH=CONFIG]18931[/ATTACH] (as You've said it was soft in places, I've sharpened it a bit), [ATTACH=CONFIG]18932[/ATTACH] (I've made this one less sharp and removed grain), Tried this one again, I've edited it according to Your hints, reduced contrast and exposure a bit [ATTACH=CONFIG]18933[/ATTACH]

[ATTACH=CONFIG]18934[/ATTACH] (I've added contrast and shadows in this one)

Are they ok after corrections ?

and new one please:
[ATTACH=CONFIG]18935[/ATTACH]

Thanks in advance

Bump

[A330-343X]

1. colour ok, but this version soft in places
2. oversharpened, noisy, borderline for glare
3-4 ok
5. contrast




Unless otherwise noted, any contrast issue will be related to the lack thereof.

Ok. Thank You !

Corrected ones:
(as You've said it was soft in places, I've sharpened it a bit), (I've made this one less sharp and removed grain), Tried this one again, I've edited it according to Your hints, reduced contrast and exposure a bit

(I've added contrast and shadows in this one)

Are they ok after corrections ?

and new one please:


Thanks in advance

[dlowwa]

Thanks. Will try editing according to Your hints, and ask here later.
Next ones please:
[ATTACH=CONFIG]18913[/ATTACH](already asked for this one, and I've corrected colours, so it should be ok), [ATTACH=CONFIG]18914[/ATTACH][ATTACH=CONFIG]18915[/ATTACH][ATTACH=CONFIG]18916[/ATTACH][ATTACH=CONFIG]18917[/ATTACH]

1. colour ok, but this version soft in places
2. oversharpened, noisy, borderline for glare
3-4 ok
5. contrast

P.S. Would You be so kind and write what should be done if You point out reasons ? For example: if there are contrast issues, just make a hint if it should be added or reduced, Thanks so much for understanding !

Unless otherwise noted, any contrast issue will be related to the lack thereof.

[A330-343X]

Thanks. Will try editing according to Your hints, and ask here later.
Next ones please:
(already asked for this one, and I've corrected colours, so it should be ok),


P.S. Would You be so kind and write what should be done if You point out reasons ? For example: if there are contrast issues, just make a hint if it should be added or reduced, Thanks so much for understanding !

[dlowwa]

Thanks. What should be done on 1,2 and 5 in order to make them accepteble ?
1 - reduce contrast, add exposure, 2,5- reduce contrast ???

1. try bringing down the exposure/contrast a bit. may be fixable.
2. not fixable.
5. lower exposure a bit, and increase contrast, but might not be fixable.

[A330-343X]

1. borderline contrast/exposure
2. contrast
3-4 borderline contrast
5. contrast

Thanks. What should be done on 1,2 and 5 in order to make them accepteble ?
1 - reduce contrast, add exposure, 2,5- reduce contrast ???

[dlowwa]

Bumping again...

1. borderline contrast/exposure
2. contrast
3-4 borderline contrast
5. contrast

[A330-343X]

Next ones please:
[ATTACH=CONFIG]18840[/ATTACH][ATTACH=CONFIG]18841[/ATTACH][ATTACH=CONFIG]18842[/ATTACH][ATTACH=CONFIG]18843[/ATTACH][ATTACH=CONFIG]18844[/ATTACH]
As to "photo 3", it was rejected twice already, despite it's a night shot, I've been told that it is underexposed, is it ok now ?
Thanks in advance

Bump

Bumping again...

[A330-343X]

Next ones please:
[ATTACH=CONFIG]18840[/ATTACH][ATTACH=CONFIG]18841[/ATTACH][ATTACH=CONFIG]18842[/ATTACH][ATTACH=CONFIG]18843[/ATTACH][ATTACH=CONFIG]18844[/ATTACH]
As to "photo 3", it was rejected twice already, despite it's a night shot, I've been told that it is underexposed, is it ok now ?
Thanks in advance

Bump

[A330-343X]

Next ones please:

As to "photo 3", it was rejected twice already, despite it's a night shot, I've been told that it is underexposed, is it ok now ?
Thanks in advance

[dlowwa]

Thanks for fast reply !
May I get some piece of advice how to correct "5." ? Maybe reducing saturation would help ?

No, white balance needs adjusting. Yellow/green cast visible.

[A330-343X]

1-2 ok
3-4 borderline overexposed
5. colour

Thanks for fast reply !
May I get some piece of advice how to correct "5." ? Maybe reducing saturation would help ?

[dlowwa]

Bumping again because I've noticed that other threads have reply, but not mine...

1-2 ok
3-4 borderline overexposed
5. colour

[LX-A343]

1. Would reducing saturation help ?
2. Should contrast be increased ?
4. Increase or decrease ?
5. How it should be levelled, I mean to DHMI Garage building would be ok ?

1. No, you need to correct the white point
2. No ... it's never that easy. Check the histogram and you well get a hint, what you need to correct. I suggest, you adjust the curves.
4. Not much you can do, due to the overcast light grey background
5. Some verticals seem to be slightly leaning to the right.

[pdeboer]

Corrected, are they ok now ?
[ATTACH=CONFIG]18685[/ATTACH][ATTACH=CONFIG]18686[/ATTACH][ATTACH=CONFIG]18687[/ATTACH][ATTACH=CONFIG]18688[/ATTACH]
BTW I needed to correct the horizon on this one (https://www.jetphotos.com/viewqueued_b.php?id=6796238), is it ok now: [ATTACH=CONFIG]18707[/ATTACH] ?
Thanks

1. blue color cast
2. contrast and oversharpened logo
3. soft
4. contrast
5. leans somewhat to the right