If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
United B777-200 loses main gear wheel seconds after take off from SFO
Why would this require a dump and return? Abundance of caution or something I'm not considering? Maybe a hydraulic brake line severed? As for any danger posed by a missing wheel upon landing, you're going to have that same risk on either end of the route anyway.
Maybe they wanted to head back and look for the missing wheel bolts. I hear there's a lucrative secondary market in Boeing bolts. Some kind of shortage apparently.
Maybe they wanted to head back and look for the missing wheel bolts. I hear there's a lucrative secondary market in Boeing bolts. Some kind of shortage apparently.
I've heard there's a lot of 'spare' ones lying around.
Why would this require a dump and return? Abundance of caution or something I'm not considering? Maybe a hydraulic brake line severed? As for any danger posed by a missing wheel upon landing, you're going to have that same risk on either end of the route anyway.
You don't know what damage may be there, so probably you don't want to risk an ETOPS flight with it.
Also you don't know what additional damage my happen during landing. If something semi-major were to happen, you probably want the plane in LAX and not in Japan.
--- Judge what is said by the merits of what is said, not by the credentials of who said it. ---
--- Defend what you say with arguments, not by imposing your credentials ---
I've heard there's a lot of 'spare' ones lying around.
In a desk drawer in the Renton shop floor.
--- Judge what is said by the merits of what is said, not by the credentials of who said it. ---
--- Defend what you say with arguments, not by imposing your credentials ---
You don't know what damage may be there, so probably you don't want to risk an ETOPS flight with it.
Also you don't know what additional damage my happen during landing. If something semi-major were to happen, you probably want the plane in LAX and not in Japan.
No, you're right. You wouldn't want to risk it. You couldn't be certain that this wasn't an indication of larger damage rather than just routine parts falling off a Boeing.
No, you're right. You wouldn't want to risk it. You couldn't be certain that this wasn't an indication of larger damage rather than just routine parts falling off a Boeing.
On an airframe that is 20+ years old, has dozen of thousands of flight hours, and had the wheels inspected hundreds of times, and most likely replaces a few times too.
--- Judge what is said by the merits of what is said, not by the credentials of who said it. ---
--- Defend what you say with arguments, not by imposing your credentials ---
On an airframe that is 20+ years old, has dozen of thousands of flight hours, and had the wheels inspected hundreds of times, and most likely replaces a few times too.
I don't see age or cycles as a valid factor. These jets are supposed to be inspected and serviced regularly (and carefully!). I think what happened here could just as likely have happened to a 5-year-old airplane. Negligent maintenance doesn't take long to reveal itself. It's a lucky thing it didn't kill anyone.
I remember a story about a man who was killed by a semi-truck tire that had departed a long way off. He never even saw the truck. Some people just have a tire with their name on it.
It is a factor in discarding Boeing as the source of the problem.
--- Judge what is said by the merits of what is said, not by the credentials of who said it. ---
--- Defend what you say with arguments, not by imposing your credentials ---
It is a factor in discarding Boeing as the source of the problem.
Ah, that was just hard to resist. I'm sure it wasn't a Boeing thing. I mean, it didn't burst into flames or nose dive itself into the earth or pop open like bad champagne. Oops, I did it again.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment